About Denis

Denis · 12-29-2019

Hi @yossid001 I would search the cvp log and error log with the CALLGUID of the failed call for more...

Denis · 10-31-2019

Hi try to apply the following sip profile to the outgoing dial-peer: voice class sip-profiles 1reque...

Denis · 10-24-2019

Thanks a lot, appreciate this!

Denis · 10-24-2019

@ptindall wrote:If you're interested, there's an example here using a TCL as traffic generator to pu...

Denis · 05-08-2019

@janinegraves wrote:2) When you say the Debugger 'hangs' - does that mean the CONNECT buttonnever be...

Denis · 12-18-2018

Thanks, will give it a try.

Denis · 12-17-2018

Hi Coty! Thanks for sharing this! Do you know is it possible to pass Global.user variables to AGW in...

Denis · 09-10-2018

Hi! I would check first the ingress gateway configured with Call Survivability on the inbound dial-p...

Denis · 03-21-2017

Yep, I am logged in. Limited access to the partners section of the site could be the reason.Regards,...

Denis · 03-17-2017

Hi Gourav, thanks for sharing.By some reason both links are opening blank pages without content.Rega...

Denis · 03-15-2017

Thanks, Rahul!That was it, currently we do not have the TTS server. I removed the sequence variable ...

Denis · 03-15-2017

Would be great to have it!Denis

Denis · 03-15-2017

Hello!I have created a custom voice element, actually extended element with the input details from t...

Denis · 10-06-2016

Hi Sheraz, I would check first that you actually can login via sftp to the designated server and the...

Denis · 10-03-2016

One more thing to add. In my case I had to add pguser to the following groups in CUCM: Standard CTI ...

Re: CVP 11.5 -Call Fail Ramdomaly - [INBOUND]: Refer failed with 404 - Not Found. May be a problem with Routing Configuration or Gateway Dial-Peer. [id:5004]