Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello Friends,
We have a centralized 11.5 CUCM cluster with multiple remote offices in US. We currently use Calling Party Transformation Mask for every site to display the corresponding site's main number for all outbound PSTN calls. We have centra...
Experts,I 'm unable to find any document from Cisco for changing the hostname of a UCCX 8.5.1 server. Please provide me any link that you may have.Note: We are not running VMWare.Thanks,Ashraf
Good Day,I have a NM-CUE modiule installed in my 2811 voice gateway. By looking at the "sh software licenses" , the CUE is currently setup to CME mode (Based on the existing licenses). Now I want to integrate my CUE with my CUCM 7.x. I downloaded the...
Hello Everyone,I 'm trying to set up a home lab with a couple of 28XX and 2651XM series routers.I would like to simulate a frame-relay connection between HQ, Branch1 and Branch2 . All of them are conneced to a PSTN switch (2811 router) via T1 cross o...
Dear All,We are looking for options to monitor the channel utilization in a E1/T1 PRI circuit and report alarm to Network Monitoring System at 80% usage. Request your to help to know the SNMP configurations needed on the MGCP gateway (3845 ISR).Than...
Thanks Jonathan. That was really helpful. The native ELIN feature sounds interesting and it will suit our needs.
We currently have Calling Party Transformation Mask CSS applied on the SIP trunk for all outbound calls from multiple offices. This all...
Thank you so much Paolo! You were really helpful!I re-installed the CUE software and uploaded the CCM license. Now the mode is changed to CCM.Thanks,Ashraf
Sorry for the late reply Alain...Yes it worked after I made both HQ and BR1 frame relay interfaces as IETF.Thank you very much for your help !!!!!Regards,Ashraf
