Jabber Crashes anytime Video is involved. This happens only on Laptop model , Lenovo W540 /541- Windows 10 . We have a Cloud deployment for IMP , CUCM is on prem with 10.5.2 and Jabber Client 11.5, so please advise
I have a home lab and I integrated IM 11.xx with the CUCM 11.xx . Everything seemed to be configured correctly, but not able to login into jabber (ver 11.6) I keep getting " cannot locate server" error. I have attached a failed login jabber log t...
I am unable to register my Tandberg MXP 1000 to the call manager using H323 , but able when using SIP. I looked at the event apps logs and I didn't see any communications between the Call Manager and video endpoint. I don't have a firewall in bet...
Users assigned to the subscriber nodes are unable to log in if High availability is enabled on the cluster. When HA is Enabled, users can log on to both Primary and Secondary servers.
I have 2 user whose having an issue, whenever they call another extension internally, the call goes straight to VM, however, when they call externally , the phone rings few times then route to VM. Any Ideas?
The same cluster . Its an on net call
Ran DNA, Searched through the route plan report for DN duplication and also looked through CDR. I could not find anything useful.
Manish, Thank you for the taking the time to look into this. Yes, it has been confirmed the VM pilot can be dialed from the affected phone. Voicemail is confirmed to "messages" Note: There other Cisco phones provisioned in the system using the exact ...
Mohammed, thank you for the quick response. The problem is outbound calls to invalid numbers are ringing then timed out. As you stated , the expected behavior is “Telco or far end should Respond to SIP Invite with SIP 404 Not found in such case CUCM...
Rob,I did try that tool, but the problem is the values don't match to what's provisioned in the system, for example, I have the following values configured, Warning quota 45Send Quota 50Send/Received Quota 55After generated the report, I compared th...