Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I have Layer-2 communication problem to solve to let 2 servers communicate over a routed core. My core and distribution switches are 6500 with sup720-3b. I figured out that the only way I could do that without having to pull a physical link in ...
Hello,I have a tricky authentication case to submit:My users are on Active Directory in two groups- VPN Users- Network adminsThe groups are mirrored (binded) in the ACS, I have a PIX configured as a VPN server. Both the VPN users and the network admi...
Hello everyone,I have an interesting problem to submit. I have a PIX 515E with 3 interfaces (outside, dmz, inside). I have a working VPN configuration with a site-to-site tunnel to another office and remote clients connecting from home, to the networ...
I have a problem with the configuration of an etherchannel or port aggregation between an 4507 Catalyst switch and a server running AIX 5.2 maintenance level 4. The two ports on the switch are on the same blade.I tried configuring etherchannel with t...
Can someone tell me if I can use a GLC-SX-MM SFP with a 3750 switch? I looked in the software advisor tool and it seems that with IOS release 12.1(14)EA1, only the GLC-T SFP is supported.ThanksAntoine
Hello Gibs,It's an option in the ACS server. You can disable it by going in External User Database --> Database Configuration --> Windows Database --> click "Configure"There, uncheck "Dialin Permission"This should do the trickHope that helpedPLS rate...
Hi Leo,All recent IOS version support subinterfacing on router physical interfaces. The issue here is about HSRP not supporting subinterfaces in his old IOS version.regards,Antoine
Hi GillsLeo has a point there, it's very likely to be a feature set problem. I know that if you have IOS 12.0 below 8.1, HSRP is not supported on 802.1Q subinterfaces. Could you give us you IOS version?Pls rate all postsAntoine
Hi,just go to "System Configuration" --> "ACS Certificate Setup" --> Install ACS Certificate"If your certificate is installed correctly, you should have something saying so in the "Installed Certificate Information" section. Otherwise, you have to in...
Hello,your IOS upgrade failed and you are in a basic, minimal IOS CLI. To get out of there, you need to download an IOS image to your AP, and to do that you have to do a basic configuration:> set IP_ADDR=xxx.xxx.xxx.xxx> set NETMASK=yyy.yyy.yyy.yyy> ...
