Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
anyone else having problems with this file being corrupt?? the MD5 hash comes back okwin-OS-Upgrade-K9.2000-4-2sr15.exehttp://www.cisco.com/cgi-bin/tablebuild.pl/cmva-3des
We are having problems with Cisco phones 7940,7960, 7970's registering in the 192.168.6.0 subnet it's our voice subnet VLAN 17, usually it registers in the 192.168.5.0 subnet VLAN 9 our Data subnet. We think it has to do with the TFTP server being in...
Hi, We have a VG248 1.2.1 ES and modem calls outgoing to ISP such as Earthlink connect fine but whenever we do a Modem to Modem Connect it's really unreliable and slow. I've tried it with many different Modems from Zoom External, Hayes, US Robotics,...
we have (2x) Cisco 3560 running IOS 12.2(20)SE, (2x) GLH-LH-SM Gbic's, (2x) 3 ft.LC to SC Patch Cables , SC Patch Panel, 12 x SM Fiber about 1 mile run. We can't get a link light on either side. Do we need more equipment?Build #1 12x SMF ...
Here's a doc http://www.cisco.com/c/en/us/td/docs/security/asa/asa91/configuration/general/asa_91_general_config/route_ospf.html#52085 You have to specify the neighbor under the OSPF process. Example below: interface gi0ip address 192.168.1.2 255.255...
the bridge occurs on the DSL modem. What's the make and model of the DSL modem? Most of the time you can web into the DSL modem http://192.168.100.1 or https://192.168.100.1 and make the changes. If you can't you might have to call your local ISP to ...
You need FHRP isolation and GARP isolation. see Figure 1-32 then jump down to the "Configuring FHRP Isolation"http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Data_Center/DCI/whitepaper/DCI3_OTV_Intro/DCI_1.html#wp1186090 Can you post your c...
