Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi
I have Cisco Wireless 9971 phone and need to push Wireless configuration automatically via CUCM without any manual interception.
I have configured Wireless LAN Profile & Mapped in Device Pool and enabled Wifi Parameters in Phone as well.
But I ...
We have installed Expressway E & C, We have configured two NTP server in both servers.Issue: In Expressway E,one of the NTP server which is public IP address is in rejected state and local NTP address is in sys-peer node.In Expressway C, Both Public ...
Hi all,I have doubt that how cisco jabber's directory services works. whether it will use our domain name / password for sync with LDAP or it will use our LDAP user name / password (the one which we used to configure with CUCM). because whenever use...
Hi all, I have query whether we can able to change incoming number as Display name. For Example:My name is Naveen, My Contacts like Mobile and Work Number are integrated with my LDAP in our CUCMSo, Whenever users searching my contact in Jabber / Corp...
RTP and RTCP typically use unprivileged UDP ports (1024 to 65535)
Refer:
https://books.google.co.in/books?id=A--5BQAAQBAJ&pg=PA149&lpg=PA149&dq=RTP+and+RTCP+typically+use+unprivileged+UDP+ports+(1024+to+65535)&source=bl&ots=6Ab0EkADjJ&sig=IzczpJauSa...
Thanks for reply Mohamed Khan
Is possible to push configuration via Bulk Deployment Utility which is used in 792X phone where we will configure WLANDefault.xml and push this file via TFTP
Do we have above tool for Cisco 9971
We have CMR in cloud and have Cisco Expressway MRA as well.
We are planning to integrate CMR Cloud with our CUCM & Expressway MRA.
We have configured SIP trunk for CMR cloud and sip route pattern for the same. When we dialing video conferencing num...
