Voice Systems and Accessories - Small Business

UC560 Users dial a "7" then 1+10 or just 10 digits. I'm getting carrier message "the number cannot be completed as dialed..." with the following config below. When I put an analog phone right on the POTS line I'm able to dial out successfully using 1...

I'm unable to send calls to my carrier on POTS lines plugged into the FXO ports. When I dial 7+1+10 I get "that number is not in service..." from the carrier. According to my translation rule I should be sending 1+10. When I plug an analog phone into...

Group,I came across some unexpected behavior yesterday I was wondering if someone could help shed some light on the problem. In my DNS I created this record: _sip._upd.platautofinance.com which when I do a query using MX Toolbox it is correctly repor...

Hello,I bought a spa122 and several spa112's for replacing ata's in the field.Is it possible in these devices to use the following parts in a dialplan.Example 1:*1xxxxxxxxxx<:@fwdnat.pulver.com:5082;uid=jsmith;pwd=xyzExample 2:*1xxxxxxxxxx<:@fwd.pulv...

I have problems sending notify to our Cisco phone with the new PJSip driver from Asterisk.I had no problem before with Chansip. I have submitted the problem to the Asterisk team but I still cannot find what the problem is.I can reboot a yealink phone...

I've just purchase a Cisco ATA, SPA 122.I can't get the Admin page up when I input the IP address of the ATA.Browser is Safari. Any help greatly appreciated. Cam.

Hello, I do not turn on the SPA122 web server, when I use the IVR command with the 7932 option I have an error message informing me that the command is invalid, what to do? thank you

I have bought a SPA525g colour display phone and I need to re program the SIP Domain, Outbound Proxy, User Name, Password and Authorization ID Can anyone tell me how to  do this please ?

Hi there,We purchased an SPA504G Handset from someone on eBay. We're using the phones with a hosted solution from Gradwell, but need to access the admin menu in order to put in all of the gateway details.Unfortunately, when I login via IP to the phon...

Hello and good afternoon;I have just configures 3 SPA504 with sip configuration. The phone is able to make and receive call from and to outside its network. The problem is when calling inside extensions. Any light on this matter?

HiI am have just started trying to setup some BYO Cisco SPA504G (running 7.4.7 firmware) on our network which we are using MyNetFone as our virtual PBX.My issue is that the phone is not picking up an IP address from the SBS 2003 Server. We had an iss...

We have 11 Cisco IP Phone SPA504G handsets set up with a Hosted PBX VoIP system. We are having issues with one of the handsets (not noticed on any of the others yet), that when using the speaker phone mode the internal callers voice is intermittently...