Hi all, i was wondering, is there a restriction to get a 2 port ivr license for a cue that is in a UC540?I guess not since it is a normal CUE module attached to an IOS based device.
i'm trying to setup an ipsec vpn tunnel between a rv042 and a uc540.I think I need to setup the VPU tunnel through CLI since CCA can only do EZVpn.can anyone give me an how to or something like that ? i'm newb at cisco CLI.thanks
We have installed a UC320W at a client's office and they have 5 SPA 540G's and 2 FXO lines - 1 regular and 1 Fax. Question - is there a way to suppress the ringing of the fax line that is being used as a outbound only?ThanksBill Griffin
Hii've setup email notifications for new voicemail on my uc540 with my usual SMTP settings but it's not working.where can i go to check out the logs and localise the problem ?
When callers call they are answered by the auto-attendant(AA). The AA plays a greeting such as " Thank you for calling...". The callers here "...for calling...", the beginning gets clipped everytime. If I call the AA internally, the problem does n...
HelloI have a doubt the port configuration between the UC and the Switch has to be mode access or mode trunk, because I have it mode access in the voice vlan and is working fine, but someone told me have to be mode trunk and I have that doubt.thanks
I have a multi-site I am working on and we need a line appearance for the phones at the remote location at the owners desk. The owner has a 7965 phone and two 7916 and we want to put the 6 phones at the remote site on buttons on teh 7916 so they can ...
Hi All,Here is the situation:Cisco UC560 with dual PRI Cards.We have about 10-12 fax lines that we wanted to tie into the phone system. We were recommended the SPA8000, however I am diving into this thing and this acts basically as a phone system th...
Hey guys,I was wondering if I could get a SIP trunk template for the UC500 for NexVortex with the following info:Name of ITSP: NexVortex G729Local: USADisplay Primary Proxy: Yes, or autofill 66.23.129.253Display Registrar Server: Yes, or autofill 66....
Is there any option for a CLICK TO DIAL Feature, as normal simple analog PBX on austrian Market provide this Feature !Million thanks for any hints.As for information, i work as a Business Unit Leader at AZLAN, so i can promise that this could be a mu...
Hi GuysIn UC320 setup with SPA 500 series phones when you want to add numbers to corporate directory it does not gives you a option to add.How do we add numbers in there, what we got informed is that we can upload them by going into UC320.We can do t...
Hi there,I have a UC540 (using the software it came out of the box with, configured with CCA 3.2) that I'm trying to use with SIP trunking. The carrier only supports ulaw, so that's how I've set it up.Yesterday morning, after factory-resetting it an...
Hello allI have recently updated my customers phones to allow for daylight savings. Since this change has been made it seems that all the phones now produce a very loud tone when each of the numberic keys are pressed. So loud in fact that the handset...
I am using a Cisco SPA525G phone and it was working perfectly. When I would use Dialectic to dial, it would ring the phone in my ear with my Bluetooth and I would not have to touch the phone, it was amazing. The phone broke and Nextiva sent me a new...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: