Voice Systems and Accessories - Small Business

Call to DID at a no answer state, voicemail answers " There is no mailbox associated with this extension. "uc500-advipservicesk9-mz.124-11.XW6.binUC520 with 12.4I have the DID in the primary E.164 number, deleted and re-created, restarted...  Users c...

There are 3 computer at my office and one of this is a server. Our modem does not give ip addresses automatically to comps so we configured it manually. It was giving automatically before, after this ip problem we could not use our voip phones. I che...

I have a new installation of UC540 and a SIP trunk to Telco. Everything looks good exept for the 7936 phonesdont seem to send DTMF commands from the keypad. Other phones such as 7940 and 7941 work fine with DTMF.Any ideas where to look ?7936 DTMF cod...

I have incoming calls setup on FXO ports to ring the operator.  After 15 secs, the extension is setup to go to AA.  After 15 seconds it goes to a fast busy.  I also tried to have incoming calls go to a blast group for 15 secs then AA but the result i...

Does TimeCardView and CallConnectors come with UC520 bundle? Or is there any extra charges for these applications, if yes what are the charges.Can some one please show steps to configure and install Extension Mobility on IP phones.Thank youNaazish

So I have a client who we just upgraded to 8.0.2 .  This is UC520 is just an 8 user license.  However when I do a show ver on the device I see:14 User Licenses10 FastEthernet interfaces2 terminal lines1 Virtual Private Network (VPN) Module8 Voice FXO...

Inbound works just fine.Outbound get a busy dialtone.I ran the voice debug thru CCA 2.2 and have uploaded the logs.Any ideas?

I'm trying to setup the VPN within the UC520 to use Radius as the authenication method.  Has anyone done this or even posible?Thanks,

I have a customer that is utilizing the following:UC520 with PRI and 30 7960 phonesThey are also using the salesforce.com connector for call logging.  This works fine until the customer installs two other connectors from Salesforce (office and outloo...

Currently our phones on our UC520 only ring 3 times before going to answering machine.  How do we change this to a different number (ie. 5).Thanks

I have ASDSL connection to the WAN port of an SPA3102.The SPA3102 keeps loosing the connection, sometimes for hours, sometimes for minutes.If a conversation is establish, it will not hold more than 960 seconds.If I reboot it using /admin/reboot it wo...

for SPA5xxdialing 800 works fine, but I know this consumed by the phone

Hi Guys,However my first post not answered yet but i want to ask my secound question is it possible we can use G723 codec with WRP400 i can not see it from drop down box.Regards,Haval