cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
916
Views
0
Helpful
2
Replies

Multiple SPA525G's phones at remote site with UC500

ckent1111
Beginner
Beginner

Is it possible and supported to have multiple SPA525G phones at a remote site of an SBCS UC500 deployment with only a basic DSL modem/ switch and not a full blown security router (ASA, SR520, etc) at the other end?

1 Accepted Solution

Accepted Solutions

Alexander Maroukian
Rising star
Rising star

Hello,

Yes it is supported as these phones connect individually to the UC and are creating their own VPN tunnels.

You may use up to 10 on UC540 and up to 20 on 560.

HTH,

Alex

*Please rate helpful posts

View solution in original post

2 Replies 2

Alexander Maroukian
Rising star
Rising star

Hello,

Yes it is supported as these phones connect individually to the UC and are creating their own VPN tunnels.

You may use up to 10 on UC540 and up to 20 on 560.

HTH,

Alex

*Please rate helpful posts

Hi There,

just to add further to what Alexandra has already stated, you should also make sure that your router can support VPN passthrough or at the very list VPN ALG's, this way it should work more smoother

Cheers,


David Trad.


**When you rate a persons post, you are indicating a thank you or that it helped, but at the same time you are also helping to maintain the community spirit - You don't have to rate posts and you wont be looked down upon :) **

Cheers, David Trad. **When you rate a persons post, you are indicating a thank you or that it helped, but at the same time you are also helping to maintain the community spirit - You don't have to rate posts and you wont be looked down upon :) *
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: