cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4467
Views
0
Helpful
13
Replies

Trying Register 3rd Party SIP phone with UC540

networkwise
Level 1
Level 1

Hello,

I have a UC540. Im trying to register an iSoftphone Pro Mac softphone client with the UC540. The particular UC540 already has a number of Cisco 7900 series phones registered using the default cisco protocol SCCP and is working with no problems. There are some Mac users that would like to use a softphone with the UC540 hence this effort.

My configs and debugs are below.  The error messge I reieve is :

uc540#SIP/2.0 404 Not Found

Any advise would be appreciated.

Andy

!

voice register global

mode cme

source-address 10.1.1.1 port 5060

max-dn 4

max-pool 4

authenticate register

create profile sync 0428016071226793

!

voice register dn  1

number 500

name Andy's Phone

label 500

!

voice register pool  1

id mac 7CC3.A1A1.EF11

number 1 dn 1

dtmf-relay rtp-nte

username siptest password siptestpw

no vad

uc540#debug ccsip messages

016329: Jul  4 16:51:58.738: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:

Received:

REGISTER sip:10.1.1.1 SIP/2.0

Via: SIP/2.0/UDP 192.168.10.12:5060;rport;branch=z9hG4bK1648049559

From: Andy <sip:siptest@10.1.1.1>;tag=406553606

To: Andy <sip:siptest@10.1.1.1>

Call-ID: 280655791

CSeq: 1 REGISTER

Contact: <sip:siptest@192.168.10.12:5060;line=387f4495119c32d>

Allow: INVITE, ACK, CANCEL,  BYE, REFER, NOTIFY, MESSAGE, SUBSCRIBE, INFO

Max-Forwards: 70

User-Agent: iSoftPhone Pro 3.4112

Expires: 1800

Supported: 100rel

Supported: path

Content-Length: 0

016330: Jul  4 16:51:58.746: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:<