VPN

I have an EZVPN client config on my 2821 that I would only like to give access to a few host of my LAN. The remaing hosts should all use the default route. Is this possible with Split-tunneling, everything Ive read so far says it can only be done on ...

Hello, I want to establish a VPN tunnel, our VPN GW is a Cisco ASA. The partner VPN is behind a firewall. It has an internal IP which is natet in a public IP. I don't know why, but it doesn't work.Is there a problem to establish a VPN connection with...

Hi GuysIm trying to get the java client to lauch a desktop on our citrix server, it appears to just give me a full desktop on the Citrix server itself and not a published application or desktop.Is there something i have to configure under the Bookmar...

Hi AllHope some one can help. I have 2 x 2801's both fitted with a WIC-2AM and running the security IOS. I have configured the VPN using the SDM utility.Problem - no encrypted traffic shown on the monitor but when I run the “Test tunnel” it repor...

We are running an ASA 5545 and twice now we have had the device appear to revert itself back to a former running config.  This manifests itself by a bunch of the anyconnect packages disappearing from the flash drive as well as the configuration rever...

                   I have been trying to get on cisco connect to get the guest access password but no luck and my kindle won't connect to the wi-fi without the password.  I even talked to cisco, linksys and netgear but still no luck. Please help. tha...

I recently purchased a Kindle fire that I'm trying to connect to the  internet.  I tried our password but it won't let me log in with it.  I  also tried guest password.  Please help.

I am trying to setup a VPN connection between two sites. The remote site is a 3650 switch connecting to a Palo alto firewall. I can bring up the VPN with no problems but I am unable to send traffic over the VPN.Here is the config from the Cisco switc...

I have set the tunnel up between ASA 5505 and ASA 5510, but I can't ping the local networks of both ASAs.ASA 5505ASA Version 8.2(5) !hostname ciscoasaenable password 8Ry2YjIyt7RRXU24 encryptedpasswd 2KFQnbNIdI.2KYOU encryptednamesname 10.2.3.0 baghda...

Hi all,i have a strange issue with Vpn Anyconnect on a platform ASA 5510 with version 9.0(3) and ASDM 7.1(3).I configured Anyconnect IKEv2 with self-signed certificate.When connect with Anyconnect client (version 3.1.02040) its fail with this error:S...

Hi somebody,i just configured cisco easy vpn configurion in cisco router. VPN tunnel is up but i can't ping & access internal IPs from outside.here is my configuration file & please help me check it.My Internal IPs = 192.168.1.xxMy VPN pool IPs = 192...

I recently purchased a Cisco RV180W VPN router and would like to enable the VPN (specifically IPSec) capabilities so that I can connect via my Android 4.0 (Samsung Galaxy S3) phone.  I need step by step instructions (I'm quite unfamiliar with Cisco r...

I have a l2l vpn tunnel set up between 2 different sites.  The configs are very basic and I just used the wizard to set up the tunnel config on both ends.  I have been around and around with TAC and the ISP but I can't seem to figure out what is goin...

Hello to all,I have a Cisco RV042 with two wans. A 1MB and 10MB with another. All is well when I need to configure Port Forwarding. I want to connect to my IP Fixed Wireless MS RDP but without using the default port 3389 but another port like 53389. ...