VPN

Attached is the visio of how things will work out physically. My goal is to have all traffic destined for either the 10.0.0.0/24 network or going the other way to the 10.1.0.0/24 network be sent over the VPN tunnel.I'm wondering if traffic coming fro...

how can you configure a compact switches C2960G ssh and telnet for remote access ?

Hi,I configured a remote-access vpn on an ASA 5510 version 8.3. This is the configuration............tunnel-group prova4 type remote-accesstunnel-group prova4 general-attributes address-pool vpnpool1 default-group-policy test_vpnpool1_policytunnel-gr...

We are using ASA5520 as our VPN concentrator and has configured IPSec authentication using digital certificates with Microsoft CA for the remote access VPN. The AAA server used for remote user authentication is Windows Active Directory. Screenshot of...

Hi,I am using cisco ASA 5540, Is there any command to check the tunnel uptime?Regardskumar

Hi,We have  remote access VPN configured in our Data Centre on Cisco ASA 5520 ver 7.0. for users to be able to connect data centre network.I have observed a  strange thing -If users connect from thier home using WiFi Broadband Internet connection, VP...

I believe if we enable the sysopt for ipsec traffics on the FW then it wont looks for interface ACL and acl will be applied by using of vpn filter on group policy profile.My problem is like.. the user is connected on vpn from outside and trying to do...

hi there,I'm trying to setup a VPN between a PIX and a Draytek. I've managed to get the tunnels to form but no traffic seems to be going down them. I'm guessing there's an error with NAT or an access list??I notice in the PIX under IPSEC rules it say...

To my situation: I have several locations that are routet via MPLS (from my provider). In the locations 192.168.x.0/24 nets are used. The Provider Gateway is always 192.168.x.1. At the location 34 (192.168.34.0), we have also an Internet SHDSL line. ...

I have multiple VPN endpoints setup on our Cisco 2821, an SSL VPN, a site-to-site VPN, and a Web VPN for windows users. For whatever reason, the web vpn service periodically fails. The only way I've been able to bring it back up is to reload the rout...