VPN

Hi All.We have just setup a IPSEC tunnel between 2 locations.  The tunnel itself is up and stable but i'm having issues when trying to connect to certain webpages at the other end of the tunnel.  It seems as though i need to ping these devices or ser...

here's a basic network diagram:*internet* ---- [cisco 831] ---- [pix 501] ---- *internal network*i want the ablity to connect to my network when i'm away from home.  i configured the pix and tested it; i can establish a secure tunnel.unfortunately, i...

I'm pretty familiar with setting up a VPN but a customer asked if we could NAT our servers to a range they provide and I'm not sure how this can be implemented.Here's our setup (sanitized):our side (10.1.1.0/24) <---> ASA <---> router <---> Internet ...

hello,i have a problem whit mi easy vpn client is down every 10 seconds an appear this this message in debug:*Mar 11 08:50:33.557: ISAKMP:(3005):purging node -1308217119*Mar 11 08:50:41.345: ISAKMP:(3004):purging SA., sa=83A4B344, delme=83A4B344regar...

hi all,i configured asa 5505 with remote vpn clientand i used these vpn client to connect avaya vpn hard phones and i connected 4 phones using same username and passwordif i connect 5th phone it is not connecting and if i try to connect cisco vpn cli...

I have been reading that as of Pix version 7.0 PPTP is no longer supported. can you tell me what the alternative to using PPTP would be?Thanks in advance,Dave

Cisco router to ASA. Interesting traffic from router will not bring up tunnel. Packet tracker from ASA will bring up tunnel. Basic Phase 1 and Phase 2 configurations match. Router needs to be the side that brings up tunnel. Here is syslog from ASA wh...

I have an ASA as a hub for multiple VPN connections.  In this case I have users coming into either IPSEC or SSL VPN's terminating on this ASA.  They are able to reach anything except for one site.  This site (other spoke) is configured on the ASA for...

Currently have a remote vpn setup which gives users access to the internal network. When I try to configure the same tunnels such that they can have access to the private dmz off the same ASA it doesn't work. Is it possible to do this?

We switched our ISP from 1.1.1.1 to 2.2.2.2 in the attached config, now for some reason, our clients connect and authenticate via radius without any problem but the VPN client logs show "remote peer is no longer responding"  after a few DPD attempts....

AllI have an Cisco 871 at a remote site and at the head end I have a Checkpoint Firewall; I can get the tunnel to come up and everything seems to work okay except for Outlook to Exchange server and File Mappings basically anything using AD Authentica...