VPN

Hi, here is my situation, we have two ISPs in HQ, ASA has outside IP from ISP1, we have a WAN load-balancer sitting in front of ASA, when ISP1 goes away, the WAN load-balancer will NAT ISP1 IP to ISP2 IP.Now I want to implement site2site VPN redundan...

I am about to deploy a solution where I will have lots of remote branches which will have dynamic and static ISPs. They will all connect to the Head Quarters office (HQ).In my testings, I already have 3 clients and I am doing a lot of config statemen...

Hi all,I have a case that some users on inside network need to access a partner server through vpn client connection (remote access).We created the rules to permit the udp ports 4500 500, but the connection dosen't work.Somebody know, how can I fix t...

Hi,I've got to activate the Cisco VPN Client from a PC that I reach via Remote DeskTop. Unfortunately, the VPN client isolates the PC once the VPN is set up and therefore locks out my RemoteDeskTop connection. Is there a way to avoid this behaviour? ...

Anyone know where I can grab a Cisco vpn client for a MAC?

Hi, is it possibile to connect to an ASA appliance from a PC using the Cisco VPN client through a socks ? In other words, is it possible to socksify a Cisco VPN client ? If not, which is the best alternative solution ?Thanks in advance.

ASA5510 Security Plus 8.0(4) with 2 WebVPN licenses. I want to use the AnyConnect client at this time only.I configure an AnyConnect profile and add 10 local AAA usernamesOnly 2 can connect at a time. The AnyConnect client does get installed via th...

I'm trying to restrict the aliases user accounts can log in to when using SSL VPN. Right now I have several groups with different customizations, but every user is able to login to each of the aliases I've setup. The authentication portion is taken...

Hi after having an issue with my ASA 5520 Active/Standby i had disabled the failover on both devices. I then re-enabled the failover by issuing the failover command on the primary device first then the failover command on the second device.sh failove...

Hello,I have a problem with my setup on asa 5505.Version of cisco is 8.0.2At the begin all the IP in the inside interface have a web access.I add a static rule for one IP of the inside interface , and after for this IP the web access does not run.My ...

I have a VPN tunnel with the following configuration:access-list DMZ_nat_static extended permit ip host [actual DMZ IP] host [Remote IP]access-list Outside_3_cryptomap extended permit ip host [one of my outside IP's] host [Remote IP]static (DMZ,Outsi...

I have an 871W router with an IP phone. The phone is a NEC. The router is configured to establish a VPN to a PIX515e. From my understanding the tunnel is on demand. I have been having problems with inbound outbound calls. Is there a way to configure...

I have configured a solution where, when VPN users login they are authenticated using secure-ldap by a Windows AD server. I carried out several tests with the following results:On the AD server - Prompt user to change password at next logon - PASSOn ...

If I setup a VPN on an ASA interface which is not the default route will it establish? The interface is the backup default route (using floating static and tracking) but not the default.Basically this is what I want that the VPN only comes up in the ...