I have been given the task of finding out when employees log on and off our VPN which terminates into a ASA5510. Is there some type of report or syslog level I need to enable?
We recently added a second Windows Remote Agent to have Windows authentication service available for our two ACS.Agent definition (CSAgent.ini) is correct but in Network Configration - Remote Agent (on each ACS web console) we see that the second Rem...
I would like to know if there is a plugin, or browser add-in that can be installed with administrator permissions on a Windows system that will allow a non-admin user to run the CSD without having to run the CSD installer.Our problem is that when a n...
We are having some problem with the Cisco VPN client 5.0.03 on a windows XP workstation, When try to connect with the client, getting an error message " ERROR: CISCO VPN CONNECTION TERMINATED LOCALY BY CLIENT, REASON 440 DRIVER FAILURE" What is the ...
Hi,We have a problem with our pix515e,i have two tunnel in my pix 1 to us and the other to aus.AUS tunnel is working fine,all of a sudden my US tunnel is not working.my pix shows tunnel is up but i am not able to ping my servers in US.Packet is reach...
Hello,We have a ASA5520 which vpn clients connect to. They are able to ping but nothing else seems to get thru. Only when i add a static route entry on the server they are trying to connect to which points to the vpn pool address range they are able ...
I now in final year student in networking field(CCNA student), and then I come out with my project title which to demostrate the alternate backup link using ADSL technology. The problem is, I want to know how to setup the ADSL pyhsical connection usi...
Dear All,Now i had problem with VPN site to site(ASA5500).The tunnel is up but i cannot ping HQ to branch. when i show crypto ipsec sa then i see pkts encaps as below : #pkts encaps: 0, #pkts encrypt: 0, #pkts digest: 0 #pkts decaps: 778, ...
All, we are an MSP and we have VPN tunnels to most of our clients networks, These are setup in one of several ways, ASA to ASA, ASA to Pix, ASA to Concentrator or Concentrator to Pix, Concentrator to Concentrator, Concentrator to ASA.Right now all of...
Hello,My customer has a problem with windows logon. Windows calculates the bandwidth of link by sending ICMP Packets in different size. The ICMP packets will already be fragmented (but with NO DF set) by the server if they are greater than 1480 bytes...
HiWe recently purchased a bunch of 1811 because we were told that these were able to work with the Anyconnect client. What do we have:* Cisco 1811* Anyconnect All Packages 2.2.0.... packageWhat I would like to do:* Enable remote users to connect to t...
HiI've been building a VPN configuration to allow Windows Clients using the Windows VPN Client to access our internal LAN. Well, it comes out I didn't do a good job.The VPN connection is working perfectly fine as long as XP clients are used. As soon ...
Hi,I am using a Cisco ASA 5520, Cisco VPN Clients can authenticate using RADIUS but Clientless SSL users can't. I am using the ASDM where do I need to check?I can also use the CLI if needed.Thanks
