VPN

Hi all,I have configured a Cisco 515E PIX for remote access VPN connections using PSK as the authentication type. I would like to be able to add dual factor authentication so the users would require a certificate to VPN into the PIX. I can't find muc...

Hi,Does anyone know if there are an issues relate to the Cisco877 router which would cause the IPSEC VPN site to site tunnel to drop and not reconnect, if the router is also configured for Remote access client connection?Just wondered if anyone had t...

I am currently working on a dual-authentication method for remote access dialup users to meet a security audit requirement. From my research I have found that eap-tls would probably be the best method for securing the dial access authentication but I...

Can anyone please explain why my configuration attached prevents any MS PPTP outbound VPN client access? The configuration running on a Cisco 3825 router (running c3825-advipservicesk9-mz.124-19.bin) is supposed to allow visiting clients access to t...

This morning I had a ASA5540 crash - it suddenly froze, I lost contact, and then it rebooted itself. It lost contact with its mate and consequently the secondary failed over and is now active.Now it's back up put when ping to the inside interface (ob...

We need to be able to access the Device via SSH while connected VIA VPN.I have added it to the management access:pix(config)#management-access insideAnd it says I need to add the correct access. I have SSH added to my ACL on the outside interface com...

we have firewall pix 515e sofwear v7.0, we use it as a VPN server to one company, can i make another vpn connection with diffrent configuration to another company or client ?regards

I have a pix 525 ver 7.0(4) with about 30 VPN's currently running on it at any particular time.Currently the Pix is not synchronized to the ntp server (it's about 45 minutes out).This is due to an incorrect route on the pix.when I resolve the incorre...

I have a question about VPN client hairpinning:What are the security risks of hairpinning?Is this a risk only for the client to access remote networks and the Internet as the hairpin connection?

Thanks for everyones help so far as I am very close to my goals but now I am stuck on something else.I have internet access but when I connect to my network via VPN I can not get to the internet (via http/ping etc) I get Address translation but no c...

We're currently running 7.2(3) on two load balanced ASAs. We want to upgrade to the 8.x train w/o an outage. Can an ASA on 8.0.3 and one on 7.2.3 participate in the same load balance group?

This is a controversial one:We are trying to make a failover decision between two locations... Each site has a 2811 router AND a DSL backup to the Internet. Each site has an ASA connected to the 2811 to establish a VPN tunnel. The question centers ...

Anyone have a step by step on creating rules->filters->applying to and IPsec L2L tunnel in the 3005 concentrator. I created rules, trying to assign rules to filters and SA to the rules in that filter and recieve the following error."SA is part of an ...