Hello, I have a lab configured on dmvpn with eigrp, but on the hub i can't view any spoke and on the spoke there are the ip of the Hub but with a state : NHRP ( configuration below)there are anyone here can help me please to make the state up. HUB:in...
Hi, I have established site to site vpn tunnel between ASA 5505 and Fortigate Firewall, the tunnel is up and also traffic from the ASA LANto the Fortigate LAN is perfectly working(ICMP,Telnet), but the traffic from Fortigate LAN to the ASA LAN is com...
Hi there, i am trying to figure out, what kind of license is necessary to use AnyConnect including HostScan (incl. Endpoint Assessment feature). As far as i understand an Apex License is needed, see: https://www.cisco.com/c/en/us/td/docs/security/vpn...
Yesterday I updated my computer to Big Sur 11.3 and today my Cisco AnyConnect is not working, is this a known error?I get the error: "The VPN Service is not available. Exiting."
Hello, I have a strange problem with AnyConnect. When I connect my Windows 10 notebook via AnyConnect to our ASA 5512 my client needs about 12 sec for DNS query. It seems that Windows first tries to use the IPv6 DNS servers, that it gets from my home...
Mornin' A co-worker told me that when you configure a 3-site VPN, HostA, HostB, HostC, for example, you have to shutdown the interface of the 3rd FW when configuring the other 2, is that correct? Or, am I supposed to shutdown the ISP hub router inte...
Hello, my client mentioned they need to configure secure LDAP on the CUCM, I researched and used the link below to do the configuration Configure CUCM for Secure LDAP Directory and Authentication with AD - Cisco After the configuration, the Call cent...
Hi all,I want to run Cisco anyconnect on Meraki MX-68. Meraki has released a new firmware which supports anyconnect VPN. The problem is the firmware is in Beta version and we are afraid to use this version.Does anyone has experience with the Frimware...
Hello everyone,I'm wondering if ISR4k can support Ezvpn remote IPSEC capable routers to build IPSEC IKEv1 tunnels?A migration is going from old Cisco 2921 router (Hub) to ISR4k but remote routers are old Cisco 870 routers. Thanks!
I need to purchase a standard certificate from Digicert for Cisco ASA. I need to use the public IP in the certificate CN because that's the requirement for the other peer. We don't own the IPs and Digicert needs us to validate the domain by placing a...
Hi Team, Please can you assist if we can have in the same on one Cisco ASA, route-based and policy-based VPN tunnels?Because, I'm configuring a S2S VPN tunnel with AWS no phase is UP (Even logs, i can't see them with debug commands) and noticed that ...
Hi,I'm trying to configure Cisco AnyConnect through Google's Enterprise Admin to push profile settings to the app when it starts up. There is a field in which I can enter some code in JSON format to allow me to do this. I'm entering the below, but it...
Hi I'm looking at using TrustSec SGTs to differentiate access for Anyconnect VPN clients. I have a dev environment with ASAv (asa9123-7-smp-k8.bin) and ISE 2.6 patch 7. ASA has been integrated with ISE and I can see the ISE configured security groups...
hi, after I updated my windows 10, I cannot open and connect with VPN and I got this message:I tried to go to Services and enable Cisco VPN.. but no button is active. my firewall is deactivated too how can I solve this problem?
Hello!As a pandemic consequence most users are working remotely and they are connected by VPN remote access.Another consequence are the increasing number of tickets from users claim about quality of their VPN connections.Have anyone had already deplo...
