VPN

No client is able to establish a VPN connection through the ASA unless I giive them a static translation. I know that the distant ends are allowing NAT-T connections because i see UDP 4500 when the clients are statically translated. Under normal co...

I have three ASA 5510's that are all setup identically in regards to logging. I'm using Kiwi syslog daemon to receive and monitor the logs. Two of the three ASA's logs (facility:20) are received by Kiwi, along with all three of the CSC's. One of t...

Hi, I configured a VPN Concentrator 3005 for an SSL VPN. I am able to succesfully authenticate to the server, the key appears in my systray, but after this, I can't ping anything, or surf to any websites. I configured a HTTP proxy server in the appro...

When using the exec-callback feature, can one change the message: "Callback initiated - line is disconnected" to something else, OR output some extra text??? No PPP or SLIP is used. AAA could be used (RADIUS/TACACS+).Thanks!

Is there anyway within ACS to generate logs for just a certain users not all users and to be able to automate this process?

Hi,When i start the cisco vpn client and i want to connect to a pix it's ok.The tunnel is ok. it give me a local address(192.168.31.160 for example).When i launch a remote desktop(192.168.31.220) to a server in local network it's ok.But when i want ...

Hi AllI need some assistance in finding out why I get "Callback not authorized for this user mrx" when debugging ppp negotiation.I am trying to get the callback working from the local credentials for now.Here is the config any feedback would be great...

Hello,We've got a problem with multiple vpn clients who connects via cisco vpn client to an cisco pix 515. After different time intervals the vpn session is disconnected. In the logging I see the entrie: ISAKMP DPD timed out but when I increase the D...

Good evening I would know the correct command syntax to make the old command which I used with ver.6.3With ver.6.3 I used:pix#debug packet outside src remote_ip_address netmask 255.255.255.0 dst my_ip_address netmask 255.255.255.0 proto tcp sport any...

our critical router shows RTO's n heavy latency in every 15 minutes ,the critical time when our result is brodcasted to all destinations. after that every thing goes normal.am i under attack . then how can i check it & prevent such DOS attack.

I was told to enter this command on my PIXs if I was running MS live communications Server. My question is if this will affect my VOIP users in other offices connected via box-to-box VPN? If so what could/will happen?

Hi,I have two ISDN routers, both having the BRI ports.On my router, ports are configured as follows:interface BRI0 bandwidth 128 no ip address encapsulation ppp dialer pool-member 1 isdn switch-type basic-net3 no cdp enable!interface BRI1 bandwidth 1...

Hi All,I hav econfigured for a VPN Connection on a Pix 506E. This Pix sits within a Network so traffic is Nat'd out to a Public IP address and Internet. When I try to establish a VPN the ISAKMP Phase 1 is rejected because the Peer is set to the local...

Hello Experts, I have a simple doubt for you :-)I have a topology where 2 routers are connecting via VPN to my Central Router.I need to implement QOS for video on my Spoke (external) routers.After some research I found the configuration that goes som...

I get a message "VPN subsystem does'nt exist"