VPN

When I create a VPN (server side), I have the choice of either enable it on Outside, or Inside interface. Usually I'll enable it on outside interface (so that the remote VPN client can access the Pix and from which to access the inside LAN).Then on ...

Hello All,I am not an expert with networking so please excuse my layman vocabulary.We have a VPN 3000 Concentrator using IPSec via the Cisco client to connect users from outside the LAN/WAN. It currently routes all traffic through the tunnel and the...

I'm trying to set up a Windows location (Corporate or work) for CSD based on certificate criteria. It's failing presumably because I've specified the wrong certificate attributes. The problem is I'm not sure what the correct attributes should be. The...

After a client has established a VPN connection to our PIX (using Cisco VPN client), is there a way to limit INCOMING traffic types through access lists?Currently, I use the "sysopt connection permit-ipsec" command in combo with a no-nat acl to permi...

The cpu is just hicking continuously during working hours with a 15% load of traffic. Show process cpu indicates a high util which averages 85% but none of the process is suspect.A bug scrub has not been helpful yet nor the document to reduce CPU int...

My users must always repeat their authentication before connect to concentrator.This reason appears into log windows: PEER_DELETE-IKE_DELETE_NO_ERROR.I don't know why?I'm using ACS 3.3 (on a member server) to configure external group and authenticate...

I have two sites configured for EASY VPN - Network Extension mode. The Main Site is server config and the remote site has the remote config. I am having a problem trying to get DHCP relay requests from my server site to my remote site. When I confi...

How do I setup VPN when one of the peers has a dynamic address?

According to CCO documentation, you don't need to have admin privleges (recommended, but not required) on the connecting client to download Secure Desktop. From the testing I've done in the lab with XP SP1 & SP2, this isn't the case. You must eithe...

if acs 2.6 have license release with host id.my host with acs2.6 is down for hard disk wrong in the may this year.i change the disk,and reinstall the system.when i install acs again ,i use the license before.now there is something wrong when i use to...

I have a ASA 5520 with a client to PIX VPN setup using a Cisco VPN client. How can I only allow users from the local pool subnet access to one internal resource?

HiWe've got a pix 501 at our main site and a user trying to connect to remote sites via the Cisco VPN client 4.6. Some of the remote sites are Pix firewalls and some are routers w/ipsec. For some reason, the user can connect to these sites, but can...

Case Description: There is a PIX 501 firewall whose outside IP is assigned by DHCP server, while the inside is static 192.168.1.1. There are two computers behind this firewall (inside), with a private static IPs of 192.168.1.4 (Computer A) and 192.16...