VPN

Hello,Because this is far too much ahead for me as CCNA maybe you can help me with my problem:I have two Routers, a 1712 and a 1720. Both are connected to the Internet using DSL, PPPOE and are doing NAT.I have established a GRE Tunnel encapsulated in...

I using Cisco VPN client 4.0.3 to connect to a Cisco router. I have been able to login in and access the computers on the the private network but I can not access anything on the Internet while the tunnel is active. I would like all VPN client tr...

Does anyone know a good design and engineering reference on IPsec over mGRE tunnel?Such as, 1. what's maximum number of remote spoke sites per mGRE?2. How does Hub site forward pack to remote subnet ( like which ipsec tunnel should use to forward) si...

I am having a problem where the webvpn client cannot authenticate with the Radius server using mschap2 but PAP works. Is this normal ? Can anyone please provide the steps to setup the MS Radius IAS with the Cisco vpn 3000 concentrator ?Secondly, the ...

Hi!Just wondering if anyone is using DMVPNs? How do you cope with Hub failures? It seems that in all 12.3 IOSes Spokes do not answer NHRP "Resolution Requests" from the Hub when the Hub reboots (or "clear ip nhrp" is issued). This is unrelated to Bug...

I need to improve VPN Client with Digiltal Certificate in sostitution to User and Password.Any document about this??Tanks all.

Hi,We'v got IDSM-2 in a 6500 running the native IOS....The 6500 has a sup/pfc 2 and is setup to route traffic.There is multiple VLANS/private VLANS on which we already filter traffic in/out of the VLANS using VACLs.My understanding is it might be dif...

Does anyone know how disable http management access on PIX inside interface while vpnclient mode is enabled ?What I found was that when vpnclient mode is enabled. PIX will automatically enable http server and add directly connected inside network for...

I have ordered and implemented the soho91 routers for some of my smaller customers. Everything is working perfectly although they asked if they could use this recently purchased equipment for a total VPN solution. I can't find any documents that expl...

Because of the limitations of the PIX I’m utilizing split-tunneling and would like to have the firewall feature enabled on the VPN client. The only problem I have is we have management stations like SMS etc. that need to initiate connections to the V...

We are using a cisco vpn 3030 concentrator. 8 Groups are required. In the first step we use pre-shared key instead of certificates. But we want to have the most options for extensions which may be required in future. How should we start?A) One tunnel...

Hi all, any update as to when FWSM 2.0/pix 7 will be released ?

Hello,We've a VPN made with two Cisco Pix.Both of them are running 6.3(3) software version.We have applied an access list to the two firewalls:access-group outtoin in interface outsideaccess-list outtoin permit ip 192.168.0.0 255.255.255.0 192.168.0...

I need to create a site-2-site vpn with a new vendor. Both sites are using the 10.x.x.x network addressing scheme. The problem is that the IP address on our network (ex 10.1.2.3) is already being used on the vendors network. They suggest that I tra...