VPN

3w6d: IPSEC(epa_des_crypt): decrypted packet failed SA identity checkWhat does that mean? I am very new to IPSec and dedicated vpn's, about (20minutes new :) and from what i've read, this means that a packet that comes into my router, looks for an is...

Hi, I have A pix 515UR with Version 6.20 and working on a simple setup.RoutertoPix to DMZto InsideInside Netowrk can Ping the DMZ on ip 192.168.4.2Inside Network can Browse Internet.DMZ cannot Ping Inside Servers/NetworkDMZ cannot browse Internet UNT...

A user at home has Verion DSL and tries to make a VPN connection to our PIX. It makes a connection but no data is passed to and from. I have other users who can connect with no problems so I've narrowed it down to her connection/PC. Talking to Verizo...

I have Cisco vpn clients behind the PIX and i want them to connect to a vpn 3005 which i behind another PIX . Can anybody tell me which ports i have to open on both the PIX firewalls ?

Last night I upgraded to Panther. Now my VPN Cient is unable to contact the server (Unable to establish Phase 1 SA with server "xxx.xxx.xxx.xxx" because of "DEL_REASON_PEER_NOT_RESPONDING"). It worked OK yesterday with Jaguar. The server is a PIX fir...

Hi,we are using ciscovpnclient 4.0.3 to connect remotely to a pix 515E. The authorisationmethod on the client is a certificate on an Aladinn etoken usbsmartcard.When we plugin the vpnclient (on a notebook) in the pix. (And we are logged in locally on...

Here is our Network TopologyINTERNET-->SProuter---->PIX515E---->2621XM-->LANandWANtoOtherSites2621XM: Dual 10/100 router with a 4-port Ethernet Module (1 LAN, 1 WAN, 1 going to PIX to get to Internet, 3 Free Ports)96MB DramAll Branch Sites hit our ro...

Hi AllIs there a VPN Client software for Windows 2003 OS ? I tried with the 3.6.4(A), but got an intialization error while trying to start the program. Is there a compatable version?ThanksJins

I have 2 buildings both with a T1 to the internet. At my main building I have a VPN 3015 concentrator and at the remote building I have a 1721 with IPSec feature set. I want to build a tunnel between the 2 buildings for voice traffic only. The phon...

I am trying to obtain CA certificate from Windows2000 CA Server to 2611 router but unsuccessful.I have a folder Mscep in my Certsrv folder.Does that mean CA Server has support for SCEP protocol? Or i will have to still install an addon for SCEP ? I c...

I wonder how to config EzVPN for router to support IPSEC over TCP (10000) or any other config to support PAT.I've configured the router like in the sample configs and a VPN client 3.x cann connect (without NAT/PAT).From the concentrator I know that t...

HI,The VPN client is able to authenticate with no problems and I can ping the Ethernet interface of the router and other devices once connected. The problem arises when I try to get to the mail server. I try telnet to the internal IP of the server 19...

I have create a MS CA whit a root Certificate 4096 bit, the result during ca authentication (PIX 515-UR v.6.3.3) is the following:CRYPTO_PKI: Error: Invalid modulus length in public or private key whileCRYPTO_PKI: WARNING: Unsupported certificate or...

I have a pix 515e and have a few pc's on the lan on the inside interface that need to run nortel contivity vpn client from the pc through the pix and out to a certain site.does anyone know how to do this ?I am running pix version 6.2(3)