VPN

I have a VPN concentrator with remote clients connecting from home. They are using Cisco's VPN 3.5 and 3.6 clients. Most of my remote clients are connecting through dialup modems to run applications from a Citrix server. They are complaining that...

Im trying to configure a VPN tunnel betwwen a PIX having a static IP and a router having dynamic ip address given by ISP. I have configured a dynamic map on the PIX to accept the connections from the router. The pix is connected to the internet throu...

Hi, Can anyone advise an idea how IPsec accounts in PIX can be managed?with local database in PIX doesn't have options to set expiry on user id's password. If there is, can you recommend any software and link pls? Regards, DJ

I run a hub and spoke VPN with a PIX at the hub and IOS routers running IPSec images at the spokes. Some of my sites have rather unreliable T1 circuits that tend to go out of service every once in a while for a minute or two.My problem is that somet...

Should I apply the crypto map to the physical interface or to the sub-interface?Thanks,Diego

HiI’m having a problem with the new VPN client ver. 4.0.I have a test-environment where I have a VPN3005 concentrator with ver. 4.0 software.When I connect to this concentrator from a W2k PC using the new ver 4.0 client software the concentrator appl...

Hi,I have a Pix 506 running ver 6.1(1). I can establish a connection between the PC and the PIX via the internet. However when the PC tries to authenticate against the domain, it fails. I browse the network and don't see any PCs or the server, I ...

I have a situation where I would like to perform the NAT/PAT process on addresses going through a PIX that are going to traverse a point to point IPSEC tunnel.The reason that I want to do this is because the source subnet that I am originating my Poi...

can anyone explain exactly how ipsec passthru works and the difference between passthru and nat traversal?

I'm trying to find a Japanese version of the 4.0 VPN Client (win2k / XP) that will work on a user's Tokyo-based computer. Link Please???

Cisco 3015I have one group created called "dialup". When I connect using the "dialup" group on a analog line I can resolve dns names everything works.When I try connecting using the "dialup" group via a broadband connection, DNS does not work. Every...

I have seen some documentation regarding upgrading the VPN client from the concentrator, but it is not very clear of the process once it is configured on the concentrator or if there is user intervention. When the client connects and the concentrator...

Hi, I've got 2 Cisco Secure PIXes 506.Question is with these am I set to implement a PIX to PIX VPN and what software version do I need on the devices? How about the hardware specs,say like memory?Thanks.

I have configured a vpn using secure client 4.0 with a Firewall PIX with 6.3 O.S. version,The client is connected directly to internet (Public ip address),after the secure connection is exstablishe the user is not able to browsing internet. It should...