im having a problem with my vpn connection it usaly gives me the following error :inconsistent private ip address ignoredand it establishes the vpn tunnel but i cant do any thing with it, theres no comuniucation.i tried to change the pool for the loc...
Hi,Has any had experience setting up IPsec tunneling between a windows 2000 machine and a cisco 2620 router? I have a cisco 2620 I can play with, so I'm experimenting with this feature.Thanks!Kawin
I have been connecting ok with vpn client 3.1 to a Cisco 3015 running (apparently) pretty much as standard. 'Simply dial my ISP, (dynamic ip), fire up the client app' and we're away.I have been toying with puting in a firewall and having a spare syst...
I have a customer using a PIX515 with Websense for Internet filtering. They are firing up a remote location where we will be installing a PIX 501 to create a VPN tunnel between the two sites. A big requirement of this project is that all web traffi...
I have a big problem. I have a site to site vpn working, using 2 PIX 506. Everything is fine. It works like expected. Now i configured one Pix, to allow access trough the latest Cisco VPN Client. I can access to local connected lan, but i can`t acces...
For a vpn connection we have a 1720 with CBAC connected to the internet via an ethernet interface to an SDLC modem (2Mbit/s). Activating a full set of inspection rules performance to the internet slows down from 200 kByte/s to 2-5 kByte/s, many timeo...
Hi,We are having a problem getting RSA SecureID working with our VPN 3030. Our RSA box is set up using RADIUS as well. I think its a bug....Any ideas???
I was wondering if anyone has any experience with using Cisco 2611 routers to setup a Site-to-Site VPN? Even a link to another location that might have some info would be greatly appreciated.Here's a basic rundown of the setup: The two locations both...
I would like to know what sort of Internet bandwidth I should be looking at when planning for this sort of scenario...Central office has VPN concentrator that will support 15 VPN Clients who dial into their local POP.
Has anyone used the VPN Client on Red Hat 7.2? I've installed it and followed all of the directions, but the client is not able to read the pcf files, which are correct.
I am currently using pix-to-router ipsec using nat 0 access-list and I want to also test the vpn client v1.1 for limited use. I have this set up but am having a difficult time getting a connection using the client. My pix classic is running 5.3(2)....
