VPN

Hi, I am trying to create site to site vpn between locations as shown in the attached diagram. The problem is LAN2 and LAN3 has same network address range. when I am trying to create tunnel getting an overlap error. Anyone can please guide me on thi...

 Hi  When i search LDAP integration for Terminal session authentication and Vpn user authentication i could find following links which states its not possible. can anyone tell for what purpose the configuration will help which i mentioned inside box...

Does anyone know if the ASA will support multiple domains with the AnyConnect client. We have been running our ASA for quite a while with a single domain but have acquired another company and appear to be having issues with remote users getting betwe...

Hi, I have following szenario: server network - ASA(home) - internet - ASA(private network) - ASA - Client Network From my ASA(home) I have an L2L over the internet to the ASA(private Network). Is it possible to built an second L2L from ASA(home) th...

Hey all.  I'm trying to set up Anyconnect to a 5545x ASA.  The setup is a little different where normally the ASA sits on the edge, however, I'm building out a new data center where the company has 2 edge BGP routers that are dual homed to 2 differen...

I have a 5555-X with 9.5(2)14 and trying to debug a VPN connection.  I was able to debug IKE just fine, but when I try to debug IPSec, no matter what level I use, I get very sparse information. IPSEC: Received a PFKey message from IKEIPSEC: Parsing ...

We have just upgraded our ASA from a 5510 running 9.1 to a 5525 running 9.5 now we have about 25 L2L VPN tunnels running  a mixture of ikev1, ikev2 with  dynamic and static remote sites. these mainly used as backup links so not much traffic With the ...

In remote access VPN, after connecting to ASA, if the user traffic (for e.g. which server he visits) needs to be logged in ACS logs, how can it be done ?  Is it possible through local logs ? Or is it possible by creating new VSAs or "strings" and l...

Hi Everyone, I'd appreciate if someone can help me with this. We have a Cisco VPN concentrator 3030 in the datacenter connecting to a remote site. The VPN was working fine and then we moved datacenters, the public IP address of the vpn concentrator ...

Good Evening!  I have a very big issue with an L2TP tunnel which is connecting with a Windows 10 PC using the Windows VPN Setup but cannot pass traffic from the tunnel to reach the LAN network or the LAN network to reach the PC ( Client).  Phase 1 ...

Hi,As the subject suggests, I'm wondering if there's a way to restrict VPN access to an ASA based on MAC address of the client.Basicaly, we want to only allow remote users connect with their work laptop and not from their home PC's for instance.Thank...

Hello In our Clientbased - VPN with AnyConnect 4.3.02039 an ASA 5500-X Series with 9.4(3)12 we have to optimize the cipher suites. Before we had the 3.x Client only supporting TLS 1.0. Now we changed to TLS 1.2 only an tried to configure more secure ...