VPN

Hi I'm wondering why all users are still able to connect to vpn despite not matching the criteria set for hostscan/csd such as file existence on endpoint. It seems that posture assessment and hostscan checks are running during the vpn login. Obvious...

Hello Support, I am trying to configure a site to site VPN with ASA 5510, One ASA is behind a NAT device. Please find the setup SITE A LAN -----> ASA ------> NAT Router -----> Internet SITE B LAN -----> ASA ------> Internet. Configured the site A as ...

Hi..I have around 100 sites that all connect to my HUB dmvpn router and all work fine except one.. heh.here is the debugI am sure the configs are the same as I use it in like 100 other sites so everything else works great and this one worked great bu...

Hi, I'm trying to use the vpncli command in a windows 2012 r2 server. The command is entered as follows: vpncli connect "PROFILE_NAME" user username_here pwd password_here As far as I've seen, this is the correct format for the command, right? This...

Hello,I have 2 sites :site A : ASA 5510VPN gateway for remote usersLAN 192.168.192.0/22site B : ASA 5505LAN 192.168.208.0/22Both sites are connected through a site to site VPN.Remote clients (AnyConnect/VPN client) can connect to Site A LAN  and see ...

Dear Sir, I use Cisco 3825 router and want to deploy Anyconnect to it. After I can successfully authenticate client by username and password, I am starting to investigate the certificate authentication way. I meet a strange Anyconnect behavior on iPh...

Hello experts,  I'm trying to use Cisco AnyConnect Secure Mobility Client Version 3.1.13015 on a Windows 7 Service Pack 1 Laptop.  The AnyConnect profile is tested and working for me on my lab laptop.  The VPN connection is established (at least i...

I currently have an Anyconnect VPN SSL connection for my outside users. But I have a vendor that does not what to create an IPSEC tunnel, but whats a remote connection to remote a server on my network. How can I lock down an account to one or a few s...

Recently I was asked to make a Site-To-Site VPN connection from my Main Office to Branch Office between two CISCO ASA's 5505. In this scenario I have set up one ASA at my Main Office with static outside IP address and one ASA at Branch Office with dy...

Hi there, i have several sites that are connected to a central VPN Hub in a route-based configuration. crypto isakmp policy 1 encr aes 256 authentication pre-share group 2crypto isakmp key ****** address XXX.XXX.XXX.XXX crypto isakmp keepalive 10!!...

Hello, we are using an AnyConnect VPN infrastructure on ASA5550 with Radius auth via ISE which checks users/groups with the AD. Our users have to change their password on first login with an initial password. Is it sufficient to just use the password...

I try to implement anyconnect vpn with certificate authentication. Refer to certification authentication in Cisco AnyConnect Secure Mobility Client Administrator Guide, I find this description below: SSL connections from the AnyConnect client to the ...

Replaced Juniper box with Cisco 1515-x ASA.  Created site-to-site VPN which allows us to ping nodes on other side but not able to replicate active directory or map shared network drives.  Please advise.

Replaced Juniper box with Cisco 1515-x ASA.  Created site-to-site VPN which allows us to ping nodes on other side but not able to replicate active directory or map shared network drives.  Please advise.