03-01-2023 05:46 AM
When the Agent click decline call in Cisco Webex Contact Center the call not get back to the Queue,
the customer transfer to the VM of the agent.
how i can fix it ?
11-10-2023 11:43 AM - edited 11-23-2023 10:14 AM
The virtual machine is most likely set up in busy condition. We must turn it off for the agent. We must incorporate a few limitations for WxCC Agent, one of which is Voicemail Profile. Additionally, look into the WxCC options for RONA Timeout.
05-16-2023 06:48 AM
It's more likely VM configured as Busy condition. We need to disable it for agent. There are certain limitation we need implement for WxCC Agent one of it is Voicemail Profile. Additionally check RONA Timeout in WxCC settings.
03-03-2023 12:33 AM
After testing and get in to the user I disabling forward voice mail when busy,
I see if I use WebEx App on iPhone or MAC PC it is working fine but if I use a PC with Windows it is still transferred to the VM
03-02-2023 03:00 AM
They had to click decline on their Webex app or IP Phone, not the WxCC agent desktop. This is an architectural limitation since WxCC (and all CCaaS products, BTW) lack a direct CTI connection to the PBX as CCX/CCE had; WxCC has no idea that voicemail answered instead of the agent.
Being in a Webex Meeting or a screen share will also put the agent in DND and cause this behavior.
03-03-2023 12:35 AM
The problem was the agent was enabled transfer to VM when busy,
On Mac and iPhone, it is work fine but on Windows, the call still transfers to VM
03-01-2023 05:59 AM
This doesn't sound like it will work in your case, but we removed voicemail from the agent and set the number of lines on the phone to 1. This results in a fast busy if the agent is on a call. WXCC then reacted to a decline correctly and put the call back in the queue.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide