06-05-2013 08:48 AM - edited 07-04-2021 12:11 AM
Hello Guys me Again I have some questions about this AP and it's IOS. I have some AP's 1131 and they have IOS 12.34(3g) JA I'm working with a 4402 WLC I'm going to change this WLC for one 5508 but this WLC has a different version software it has 7.2.103. My questions is I need to do any upgrade to my AP's IOS for join to the new WLC ?
I found a compatibility Matrix, in this document I guess i nedd to do some upgrade:
But I was checking this link
•
The WGB can be any autonomous access point that supports the workgroup bridge mode and is running Cisco IOS Release 12.4(3g)JA or later releases (on 32-MB access points) or Cisco IOS Release 12.3(8)JEB or later releases (on 16-MB access points). These access points include the AP1120, AP1121, AP1130, AP1231, AP1240, and AP1310. Cisco IOS releases prior to 12.4(3g)JA and 12.3(8)JEB are not supported.
This part of the document make me guess I don't have to do anything.
anyone knows if I really need to do an upgrade?
Solved! Go to Solution.
06-05-2013 09:12 AM
correct the WLC holds the image for the AP. The AP will get it's image from the WLC. you don't need to do it manually
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
06-10-2013 08:16 PM
Your fine. This is how you can tell if the image is autonomous or lightweight.
C1130-K9W8-M
K9W8 is capwap
K9W7 is autonomous
Sent from Cisco Technical Support iPhone App
06-05-2013 08:51 AM
If you want the AP to join and be controlled by the WLC, then you need to convert the AP to the CAPWAP/LWAPP image.
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html
If you just want the AP to act as a WGB on a WLAN controleld by the WLC then you don't need to do anything.
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
06-05-2013 08:58 AM
Hello Stephen.
Thanks for your reply.
Right now I management this AP's trought my WLC 4402 so I guess the're working as Lwapp/Capwap
My questios could be... If I want to migrate or change this AP to my new 5508 WLC I need to upgrade the their IOS Version? or it just need to join easily?
06-05-2013 09:02 AM
If the AP is already joined to a WLC, then you would just need to put the new WLC up,and tell the AP to join it.
Once the AP goes to join it will pull the image it needs to run to talk to that software version.
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
06-05-2013 09:10 AM
so the IOS version don't need to be upgrade? I know the WLC send to AP his new code but still the AP has his own IOS Version, I can be sure the change will be easily ?
Thanks Again
06-05-2013 09:12 AM
correct the WLC holds the image for the AP. The AP will get it's image from the WLC. you don't need to do it manually
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
06-10-2013 01:15 PM
So What about the Matrix compatibility? my AP doesn't have the minimun version to join the new WLC 5508 V 7.2.103.
is it a problem?
06-10-2013 01:21 PM
The WLC supports the 1131 on your version of v7.2.103
Sent from Cisco Technical Support iPhone App
06-10-2013 01:24 PM
so I don't have to be concern about the matrix compatibility?
exist any document about the WLC 5508 support 1131 AP with 12.34(3g) JA IOS ?
06-10-2013 03:04 PM
What you are looking for the the WLC code and what WLC image supports the AP model.
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
06-10-2013 03:35 PM
Dear Scott.
Maybe is my english but still I don't get it and belive me I really sorry.
When I migrating My Ap's AIR-LAP1131AG-A-K9 with IOS 12.4(3g) that are managment for one WLC 4402 V 4.1.171 to 5508 WLC with 7.2.103 I don't have to get any problem?
06-10-2013 03:43 PM
If your access point is autonomous right now, you would need to tftp a lightweight recovery image. That image will allow that ap to join your WLC. The AP will then download the correct image com the WLC. So post the show version from your AP.
Sent from Cisco Technical Support iPhone App
06-10-2013 04:00 PM
they're working as LWAPP right now but they've the version 12.4(3g).
I'm going to get the "show version"
06-10-2013 04:02 PM
So... I'm looking the incorrect table? I don't need a minimun version of IOS on my AP's to join at the WLC 5508 ?
06-10-2013 04:06 PM
No you don't. Since your ap has already joined, your fine. Nothing else required.
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide