Welcome to the Cisco Community Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, September 14, 2026 through Monday, September 28, 2026. Our experts Shree Hari AB and Suman Sinha wi...
Hello,I am trying to recover an AIR-AP2802I-E-K9 after the NAND/UBI storage was accidentally erased.The bootloader is intact and Secure Boot checks pass:U-Boot 2013.01-ge1c49d93a (Jul 28 2023)Board: Barbados-2KSoC: MV88F6920NAND: 256 MiBNormal boot f...
Hi everyone,Following up on a previous issue where this specific AIR-CAP3702I access point was stuck during image upgrade, I previously had to manually load a recovery image to get it to boot and join our Aironet 1830 Mobility Express (WLC) controlle...
file is transferred but nothing happens, Tried it with C9800-AP-universalk9.17.09.06 and C9800-AP-universalk9.17.12.04, but same resultAP505C.88D3.88BC#ap-type ewc-ap tftp://10.5.99.90/ap1g7 tftp://10.5.99.90/C9800-AP-iosxe-wlc.binDownload script ca...
Hello,I am new to the Cisco Self Standing Wireless LAN Controller System. I have always used Mobility Express, and I know it is end of life. The purpose of this AP is for learning and using it in my home lab. I have read this post below:Migrate ME to...
I'm just wondering if there is a way to get an output of the serial numbers of all the APs connected to a WLC. I know they can be individually found in the WLC web interface or through the CLI but i'm hoping to find a way to see them all.thanks
Hello Everyone,I need to generate a list of Access Points that are currently offline, along with their corresponding serial numbers, from a 9800-80 Wireless LAN Controller (WLC). However, I have noticed that the "Join Statistics" page on the 9800 WLC...
Hi Folks,I am running EWC on 9115AXI Access Points. I randomly see that Apple iPhones are losing their Internet connection while they are sill on the wifi network. As a workaround I have to turn the wifi on the iPhone off an on again. This happens al...
Dear All,we need to provide wifi coverage for data loggers in a floor of an old building with thick outer limestone walls.We only have power outlets in that floor to provide for power for an AP there but there is no network sockets and it is not poss...
Welcome to the Cisco Community Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, September 14, 2026 through Monday, September 28, 2026. Our experts Shree Hari AB and Suman Sinha wi...
Is there solution for the given bug
Hello,I'm trying to move an MR from one network to another but when I try to move it in Access Points, the list of available networks doesn't show the network that I want to move it to. Not sure why it's not displaying but I already have the MR conne...
google voice phone numbers not allowed by id.me 2fa
Hello everyone. We have a deployment of 26 MR 46, the equipment are connected to several switches Catalyst, the issue is the user report that they felt high latency in the network, they are working ok, but suddenly the network becomes slow, even they...
Hi,I am getting hard to understand use of service port in wlc 5508, Even after reading so much post and cisco note I am not understanig the use of (Even basic use) service port.As I understand service port should be access port and should be in diffr...
Hi everyone,Few months ago, we have experienced a significant increase in wireless mobility client roaming delays after upgrading our Cisco Catalyst C9800-40 WLCs from IOS XE 17.12.4 to 17.15.5. And issue was resolved after downgrading back to IOS XE...
