Wireless

I have a school with 550 iPads.  We are using two 5508 WLCs sharing the number of APs.  The DHCP server and the default gateway for the network are on the firewall.  The clients are able to get a DCHP.  After some time, maybe about longer than a mont...

Currently, we have two regions that have 5508 wireless controllers on 7.5.102.0.  Both regions are in an AP SSO configuration for redundancy.  Each active controller has a 150 license on it.  I do understand that when the active controller has an iss...

Hi everyone,we are currently in migration phase of WCS to Prime 1.3 and at this moment we are encounter the following error:We are migrating the databases at appliance 1, then backup the databases and restore it at appliance 2. This process is needed...

Hello Guys,see if you can help me out with this.We are having an issue with our DHCP release in the WIRELESS CONTROLLER 5500. I have a interface called GUEST, and the dhcp scope from this interface is enable and have more then 300 address avaible to ...

            while trying to push the new Software to a WLC i am getting error as mentioned.(Cisco Controller) >transfer download path . (Cisco Controller) >transfer download filename AIR-CT5500-K9-7-4-110-0.aes (Cisco Controller) >transfer download s...

Hello.I got "RX Multicast Queue Full" messages in the log of my 5508 WLC for more than a week now and have problems with client association.The multicast mode on the controller is set to "Unicast".Can anybody tell me what the problem could be?Thanks....

Hi I have 2 controllers 4404 running 7.0.235.3 (37 and 31 APs 1142 connected) .  2 WLANs configured and mapped with IP Helper to external windows 2008 R2 DHCP server on 2 Scopes.StudentStaff Interfaces as follows The few clients get connected to the ...

HiIm upgrading a WLC HW from WLC 4400 to WLC 5508 and my question is, what will happen to the ap parameters like antenna gain, antenna type that is set on the WLC under radio settings for each ap.Is this info stored on the AP or is it on the WLC , so...

Hello,i have a question about the Timezone settings in the WLCs.We have serveral systems: 2100, 2500, 4400, 5500 series.Problem occurs at firmware 7.0.98.0, 7.0.220.0, 7.0.240.0, 7.4.100.0So i think this issue is not firmware or modelbased.I have con...

My mobile is not connecting to wifi (my router is Wag200G) but it's connecting to any other wifi, and any other device (mobiles and laptops) are connecting normally.Help!---Posted by WebUser Motassem Ja from Cisco Support Community App

Can we change the regulatory domain of the WISM controller. The region I am working in, the max EIRP allowed in on 14 dBm. Is it a right step if I change the regulatpry domain of the WISM controller so that the EIRP of 1524 can be increased?

I am getting DUPLEX_MISMATCH messages on my switches which are serving the 1524 AP's.I have forced 100 Mbps full duplex on the switch but I cannot find the option in the 1524 AP to force 100 Mbps full duplex. Can somebody help me with this? For refer...

I'm getting error while adding Prime Infrastructure 1.3 new license file.The licence is:L-PI12-LF-1K-LIC:L-PI12-LF-1K-LIC : Prime Infrastructure 1.2 - LifecycleError:Error List Returned (-513,3039) ; Feature Is Locked To A Different Host (-9,3035) ; ...

Hi all. Looking for a little help/insight here.According to this document, the 4400 series WLC supports up to 5000 client database entries: http://www.cisco.com/image/gif/paws/113303/restrict-wlan-clients-00.pdfI am running into an issue where I have...