Wireless

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Labels

Forum Posts

Hello,My problem, in a nutshell, is that clients do not get an IP from an external DHCP server when connected to a guest VLAN.My current setup is:Native VLAN 1 (192.168.2.x)2008 DHCP Servers2504 WLC5 AP1142ASA5510 routing between the VLANs and config...

I have got a wireless project with WLC  main office and have 10 sites where ap's are there and ap's getting registerd .we need 4 ssid in all branches same .ssid guestssid scannerssid uservlan 600 main office for scanner 192.168.1.0in branch vlan 600 ...

     I am a bit new to the Cisco WLC and we recently inherited support for a property with no information and we believe they may have more LAP's on the network than the controller is authorized for (an AIR-WLC4402-50-K9). I was wondering what I can ...

Hello Everyone,New to this forum and also to CISCO WLAN design so would appreciate any help from you guys or pointers in the right direction to help myself.I have deployed a CISCO WLAN in our office.I have a 2108 WLAN Controller, 2 x 1141 LWAP APs, a...

shayles77 by Level 1
  • 16801 Views
  • 3 replies
  • 0 Helpful votes

Hello,I am trying to setup an Aironet 1142 to act as a repeater (wireless extender) to my home wireless network.  This was working but would constantly disconnect from my wired network.  The light when working is green. Now the light is just blinking...

morejola by Level 1
  • 1394 Views
  • 2 replies
  • 0 Helpful votes

Hi all,Can we use Cisco aironet 1152E Mesh AP as a Point - to - Point bridge connecting 2 sites 1 Km apart.Pls suggest the considerations before deplying.Thanks in AdvanceRegards,Nasir Manzoor

Nasir1111 by Level 1
  • 1419 Views
  • 5 replies
  • 0 Helpful votes

GuysOnce I'm on a call on bluetooth, is there a capability to transfer back to headset or speakerphone? I can't find any menu option to do this - cell phones can do this quite easilyThanks

erickppp1 by Level 1
  • 1015 Views
  • 1 replies
  • 0 Helpful votes

Hi guys and girls last month I passed my CCDA and Cisco Lfecycle exam for wireless LAN.Now I should receive 2 certificates: CCDA and Cisco Advanced Wireless LAN implementation specialist.I received the CCDA certificate but no e-mail or certificate ab...

Erik Boss by Level 1
  • 1086 Views
  • 2 replies
  • 0 Helpful votes

Hello,I have a little issue while I configure 2 Cisco 2504 wlan controllers with 9 AP's (1142) in the same subnet.Everything works okay, e.g. mobility groups, association of AP's to the two controllers.However, when I leave RF group mode to auto, bot...

erwee1973 by Level 1
  • 2445 Views
  • 6 replies
  • 0 Helpful votes

Hi All,  Has anyone done a wifi mesh using 1552E and  1552i mix of AP's ? With the 1552E as RAP and 1552I's as MAP's ? Is it a recommended model of deployment  and will it work well ? the 1552i having radiation pattern more towards the ground when mo...

Hello,I hope my english is comprehensible. I have an environment with 2 WISM (4 logical controller) and about 450 APs. Both WISMs have the same configuration. Now I want to migrate the whole thing on 2 WISM-2. I've designed the following scheme and I...

Review Cisco Networking for a $25 gift card