Wireless

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

review


Labels

Forum Posts

We are using a third party certification authority (Entrust) and the certificates generated by the CA are SHA256 certificates.  I see ACS does not currently support support the SHA 256 certs, but TAC says software versions 7.3x and above on the WLC d...

p.dave by Visitor
  • 1506 Views
  • 4 replies
  • 0 Helpful votes

What are folks thoughts regarding increasing the beacon interval as well as the dtim interval on a very large byod data ssid? I know the dtim increases for voice but I'm interested in upping those settings on regular data ssid.Sent from Cisco Technic...

Trent Hurt by Level 5
  • 19857 Views
  • 24 replies
  • 0 Helpful votes

I have a question about external antennas on an access point. I have to plan a wireles solution, that also includes coverage in the industrial freezers. The freezers are one part of the sotck rooms, so the general coverage will be done with 1602I acc...

Hu371 by Level 1
  • 3564 Views
  • 5 replies
  • 0 Helpful votes

Hi!I have some problems with custom web authentication on cisco air ct5760.We create an ssid for guest users with a custom page that works fine, but suddenly it fails and when we open a browser the web login page doesn't show and the next error appea...

silviapabon by Community Member
  • 1162 Views
  • 3 replies
  • 0 Helpful votes

Resolved! guest wlan

Almost there.Scenario:2504 wlcAps 1140Port 1 lan radius all okPort 2 defined for guest wlan directed attach no isp router dhcp1 utp cable on router acquire ip addressOn guest wlan no ip address is given i think i tried every combinationsAny help?Sent...

Hello,I'm facing a weird issue, I've one SSID for which all authentications are 100% correct, but now I need to use a new vlan with the same configuration, I did it, but the web page doesn't be displayed but when I entred the virtual interface I have...

salilai01 by Level 3
  • 4395 Views
  • 6 replies
  • 0 Helpful votes

We are needing to put a LAP in a clinic that is on the far side of VPN tunnel. There is no way for the LAP to access the WLC to acquire it's configuration remotely AFAIK. Although we have a  couple spare routers (2610XM and 2811), they don't have the...

baskervi by Level 5
  • 3329 Views
  • 4 replies
  • 0 Helpful votes

Hi,I'm finding the OIDs to consult the following information to a WLC 2504:      - CPU utilizantion     - Memory utilization     - Clients associated for each AP.     - Clients associted total.     - Channel selected for each  AP.     - Power transmi...

Review Cisco Networking for a $25 gift card