Wireless

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

review


Labels

Forum Posts

On a 2504 WLC, port no. 1 is being configured as active port, which means the physical connection should end up on this port.There are 3 other ports on this WLC. If i configured any one of the remaining ( eg. 2, 3 or 4 ) on the port no. field under i...

suthomas1 by • Level 7
  • 2539 Views
  • 6 replies
  • 0 Helpful votes

Hello. Does anybody know if vpn-passthrough is supported on WLCM for integrated service routers? The no refference in the release notes. Thank you.

20vek by • Level 2
  • 1297 Views
  • 3 replies
  • 0 Helpful votes

Does anyone have this problem when applying vlans to WAPS from the WCS?AP Parameters** HREAP: Profile NAME-VLAN Id mappings cannot be applied since VLAN Support status is disabled on the template.I have everything seperated out for my templates.  Ena...

We setup the mgmt interface of the WLC2504 on the subnet (10.1.1.0/24) with Cisco ASA 5505 to the internet. Can we create 2 WLANs on 2 different IP subnets (10.1.10.0/24) for internal users and (192.168.100.0/24) for guest without layer 3 routing?

mml4cisco by • Community Member
  • 1325 Views
  • 5 replies
  • 0 Helpful votes

Hi all,Anyone delved into the use of RADIUS attributes to apply QoS values (DSCP/802.1p) to wireless users via a WLC?With the emergence of ISE and the concept of a shared SSID for several user types I may want to apply QoS profiles by user rather tha...

HelloI have problems to connect a MAC-Server from the wireless-network (WLC-4402-50-K9, Version 5.1.163). The wired clients doesn't have problems to connect to the MAC-Server. The connection works over broadcasts. The wireless-network don't forward t...

keynet by • Level 2
  • 7022 Views
  • 1 replies
  • 0 Helpful votes

Ho

i have 10 linux based PC & i wan to connect these wirelessly throung Robin open mesh.shounl any one please tellme the procedure how to implement the it.Anil

Hi forumers'i experienced this problemlog copy from WLC : AP  'XXXXX', MAC : e8.ba.70.93:95:99  disassociated previously due to AP reeset. Last reset reason: oeprator changed 11g modesometime it will auto recover and joined, else need to manually unp...

Dear All,I have purchased some new LAP1142  APs (AIR-LAP1142N-E-K9), but are not registering with my WLC5508 controller. Please find the log msgs am getting from the AP console attached with. In my controller i am getting the error report " AAA Authe...