Wireless

Do the 1131 and 1242 access points come with mounting kits when your order them or do we have to order them separately? Also, what about the 4402 controller?

We have a WLC 4404 witch 1131 AP's. On a few of them one of the ordinary SSID's is also sent as an Ad-hoc-SSID !If I connect to the Ad-hoc-SSID and look at the client info in the WLC, the only info is:Client MAC: xx:xx:xx:xx:xx:xxClient vendor: Intel...

hi..i'm having trouble with ip phone 7920...my wireless infrastructure is using WLC 5.1.and the LAP are 1252..the problem is sometimes the 7920 phone can't make a call... it's just dropped somehow....like.. u dial an extention and nothing happen..it'...

Anyone using the Symbol LA-4137 ?I'm troubleshooting at a hospital and they have many of these Symbol LA-4137 connect to a Alaris Pump. LA-4127 client is setup for LEAP and is sending 5 authentication packets per second. The radius server sends back ...

Is this solution available for us to quote for customers yet? If so, how can we create a bill of materials for it?

We have three 4404-100 controllers running 4.2.130 and roughly 170 AP's spread across 35 buildings. The controllers are all connected at the core (Three 4507's) and AP's are routed to them. I am using DNS for new AP's to find the controller and then ...

Hi All, Please don't mistake this post as spam. We're currently creating what will hopefully be a useful technical resource for all those Cisco Certified engineers out there.www.uccert.wikidot.com There are network diagrams, videos and links for furt...

We have 3 1231ag WAPs that are having problems with 1 SSID. Seems the signal is low.This in not on a WLC, so I guess it's CLI for me.... Can someone point me how to troubleshoot this? I am a newbie at troubleshooting wireless. How do I show how many ...

I have this environment:CME 7.0 running in Cisco2851.WLC2106 with 6 1242 APs15 phones 7921I have to extend the wireless coverage to an specific point (warehouse), 150 meters away. This point only have a PC and a phone, so I don't think a bridge is ne...

Can someone help me figure where the problem isI'm trying to change from WPA2-AES to WPA2-Radius but I'm not sure if its the windows server or the AP that I have the config wrong on how can I figure that out?

I have a 1310 wireless bridge....when I power it up, it sometimes does not boot up. The I LED will just sit there and blink and the R and E LEDs will blink in unison with it. After a while just the I LED blinks. I cannot find any literature that tell...

I have a 1252 Ap that was booting to LWAPP software and connecting to a 4402 controller. It suddenly stopped booting into the LWAPP code. I can reach the Ap by telnet and it seems to boot to Autonomous mode. Is there any way to start the boot into LW...

Hello!We have an customer that has a installation with around 50 1130ap's connected to a Cisco 4404.The system is up and running but when we restart an ap it will not connectagain to the controller! (color cycle, red orange green you know ; )I does g...