Wireless

I currently have multiple 1200 series AP's. For some reason I cannot see any other AP's except the AP I am currently on in the association table. Also when trying to puch config to other ap's I fall into an INACTIVE state. Thanks

Can you configure the AP 350 for standby mode for a high availability design , if no , is there a work around , I have a critical wireless applciation , I do not want to use AP 1100 for antenna issue .

I need to use the AP350 for outdoor, is there any special enclosures I can use , I need some recommendation please . this outdoor area is very noisy , its an airplane parking. when the airplane engine starts , the signalstarts going on and off ..

I have a cisco and non cisco wireless enviroment consisting on 85 aps . the clients seem to associate to the weakest signal instead of the best. I know the new cisco code has algorithims to help this by scanning for the best ap but the non cisco clie...

hi...i'm testing tls to be deploying with a customer of mine. i followed this url exactly:http://www.cisco.com/warp/public/cc/pd/sqsw/sq/tech/acstl_wp.htmeverything seems to be allright...the certificates, the configuration steps for the acs, client,...

What your take on this? what are the flexibilities that you lose with VPN?Thanks/

I just bought an Access Point for my home network. I don't have any configuration commands or instructions. Is there a setup manual I could download somewhere?? thanks.

Hi,I have a problem with a Cisco Aironet 350 workgroup bridge v8.84. After a reboot of the bridge or. pull out/put in of the ethernet cable the client connected to the ethernet port lose his network connection. After that, a reset of the radio interf...

Does Cisco Secure ACS 3.x have the ability to lock an account after x logins. I do not see an option for it, but would think that would mitigate the dictionary attack against LEAP.

Hi,I have been able to get mac-authentication working with my Funk SBR AAA server. Being keen on punishment, I though I would get accounting to work as well. I think I am close, but I don't see the accounting packets going out to the AAA server, only...

With a Cisco 1120, does the local radius server only support LEAP? Any way to get support for PEAP? Thanks,

Is there a way to use 802.1x PEAP as the authentication method and enable the client to use CCKM under the WDS or can you only use CCKM under LEAP authentication. I know you need a cisco card or a card that can do cisco compatible extensions but I wo...

Hi, I am using Cisco ACS with Cisco AP with LEAP, and in the ACS reports and Activity windows, when I click on the Logged-in users ... no user appear ... although users are connected.The connected users appears in the Passed authentications ...ANy he...

I have priced several different brands , and found that the Cisco AP's cost three times as much as those from Linksys, etc. What makes the Cisco ones better?ThanksBrian

Working on roadmap plan to implement 802.11i within our network. Currently we have a mixture of 1200 and 350. Once 802.11i is available can my existing units support 80211.i or do we need to purchase a new Cisco AP and client model? If so when would ...