Wireless

I have the following line showing up when I dump my config:association remove allHow can I remove this using the web interface?

Hi all,I hope you will help me ... I try for few days to configure PEAP authentication on a win 2003 serv (.net) and I cannot put the certificate on the IAS server.Nothing is documented or there are very few info.The certificate is present in the cer...

Customer has 2 1100 AP's and one 350 WGB. I keep getting a situation where clients stay associated to an AP but cannot pass IP traffic. I finally have troubleshooted this down to the WGB. The WGB has one HP laserprinter attached to it. The problem mo...

With our first AP, I want to make sure no broadcasts are heard from the wired LAN. This is important so the quality and integrity of the Wireless is maintained. Should I be using VLANS???? Vlan filtering? I am not sure what others are doing about thi...

Hi all,I have two 350 bridges (both 12.01T1). One is configured as root and the other as non-root bridge. I have WEP (full encryption, 128Bit), TKIP, MIC and Key rotation=600s configured. The bridges do associate (Status=OK), and I can connect the de...

Hello, Whats the OID to to get all the MAC address of on the nodes associated ? For example, if 4 nodes are connected how do i get thier MAC address.I have the OID for find the number of nodes associates to a AP (1.3.6.1.4.1.522.3.12.1.8.0). I want t...

In many documents it's reported that Aironet 350 AP and client adapter can reach 100 mW as transmit power but my aironet APs and clients (both with diversity antennas) let me select 50 mW as maximum power. Is it normal? There is something i can do to...

In the course manual, there is a picture of a NEMA Enclosure for the 350 series with no product numberWhere can i purchase these? does anyone know.thanks with regardsDarren

I have a set of wireless bridge 340 series running V8.55 which we cannot remember the passwords to. I know from the cisco support notes it says they have to be sent back to get them reflashed to have it fixed. I do know the read and write snmp commun...

We have a lot of AP's grouped by location. So, in one location the Admin there needs to have a user account on the AP. However, we want to specify what can be done. No problelem, as long as you connect to 90 different AP's. Plus, we look to have over...

Hi all,get the error "windgs.exe the procedure entrypoint?GetActiveProfile@CCARDX500@QAEHAA PROFILE@@@z could not be located in the dynamic link library ACRD10sm.DLL "when launching the ACUuninstalled / deinstalled etc..

Hello,I have defined a Radius Authentication for administrators logging on the AP1200 Web interface.I can see a successfull authentication on the Cisco Secure and if I trace the packet coming back from the Cisco Secure, I can see a 'Radius Access Acc...

helloi have a cisco aironet 350.in the documentation we find that we can config the transmit Power until 100mW but in the web interface (AP Radio Hardware) i'm limited to 50mW.is it normal?

HelloI've read in the manual of BR352 that max distance you can configure (parameter max distance) is 40 KMs. Does it means that farther distances wouldn't work? What would it be tha furthest distance (not taking in account problems related to attenu...

How does a Aironet 350 Bridge work with 802.1q or ISL tagged packets?