Wireless

Hi,I under from the Aironet 1200 specs that the range (indoor) is 40m @ 11Mbps. I have an auditorium which seats around 350 users. I was thinking if it is possible to lower the transmit power to a range of only 5-7m so as to allocate more APs without...

Though I would love to use Cisco's own AIR-CAB150ULL-R 150ft Ultra Low Loss Cable Assy., all of my distributors are backordered on this item. Can anyone suggest a possible substitute or specs on making our own ?Please e-mail directly at [email protected]...

I remember reading somewhere that 802.1x has dynamic session-based encryption keys. The article mentioned that the key will change when it roams to a new AP. This will have some impact on VPN users. Is this true?I will like to implement on my wireles...

I've this card which have been working for a while, but it was using an AP that was not on the save floor as the client. In order to let the client associate to the correct AP. I've configured the AP and WNIC to a unique SSID. That's when the error a...

I got an AP4800E v8.80 and i want to force a channel on that AP and i would like to know how to do itThanks

I am trying to get XP w/350 card communicating to an AP350 and Cisco ACS (for authentication) using EAP but I am not successful.Any hints on what I need to use EAP on XP with this setup? I have a Win98 client working fine (w/LEAP).Must one have a Mic...

Did anybody here use EAP-TLS authentication for Wireless NICs from other vendors?http://www.cisco.com/univercd/cc/td/doc/product/wireless/airo_350/350cards/windows/incfg/win_appe.htmThis link talks about how to configure dynamic key encryption for ge...

Hi Guys ; i have a wireless aironet 340 link at 1Mbps speed. But since that link been activated i am getting too many CRC and duplicate frame errors , to prevent this antenna location been changed on ISP side ( to avoid interference ) but not fixed. ...

I am running a pix 501 ver 6.1 with tacacs 3.0 server runninfg on a NT box.I have all the user authenticated via tacacs going inbound and outbound and have setup accounting as well.I would like to find a EASY way to compile a report to find out what ...

Hello,I have a spare PCI350 and i would like to use the embedded LMC350 Card for some tests because of the external antenna connector. But this LMC350 seems different from the units which are sold as LMC350. It is not recognized in my Laptop . Is the...

Any idea of when the 1200 field-upgrade kit for 802.11a will ship in the US? Also, will it run from inline-powered switches or require a separate injector due to power draw?

Hi,I refer to the aironet 1200 specifications. It is mentioned that the range for the indoor is 40m at 11Mbps. That is based on maximum transmit power settings and 2.2 dBi gain diversity dipole antenna.Is the 2.2dBi antenna part of the cisco 1200 or ...

Is it possible to upgrade the 340 bridges to a firmware version that has MIC, TKIP and Network EAP, or do I need hardware upgrade??

I keep getting the following warning in the event log of my AP1200. Failed to Send Packet on port "awc0" (error=0x00000016)I cant seem to find any reference to it. Can anyone shed some light and tell me what it means?

This is the text I have when I connect the Bridge via serial port:Aironet BRE101E V6.38 Main Menu ICL Option Value Description1 - Configuration [ menu ] - General configuration2 - Statistics [ menu ] - Display statistics3 - Registration [ menu ] - Re...