Wireless

ACS 3.1 introduces PEAP support:PEAP support—PEAP provides a new, secure, client-server authentication method for wireless networks. PEAP also provides new support for one-time token authentication, password change/aging and powerful extensibility of...

I've read this passage on Cisco web site:To use PEAP authentication, you must install the PEAP supplicant during ACU installation or Service Pack 1 for Windows XP. This Service Pack includes Microsoft's PEAP supplicant, which supports a Windows usern...

I'm using two wireless bridge to connect only two PCs. Actually i can reach only a data rate of 3.6 Mbs. I've pick this value looking the statisstics menu.There's anyone that could help me to congigure my bridge in order to reach higher data rate???

Using ETSI standard, it it possible to connect 2 sites (distance=10KM) using bridge+solid dish antenna with throughput between 5Mbps to 11Mbps?I was told that the information in Cisco website was tested based on US standard, and if the solution is ba...

Hi! I´ve installed two BR350 to connect two buildings. The distance between these buildings is about 100m-150m. The Bridge in LANA is connected to Cisco 3548XL Swtich and the Bridge in LANB is connected to a 3COM Dual Speed Hub. The BR350 have firmwa...

Does AP 1200, AP 350 support EAP-SIM based authentication.

Is there anyone out there that has a bluetooth headset that will work with one of the iPaq Pocket PC's?

how is the dynamic key derived and transmitted?

Hi WE have Cisco 2610 Router connected to Local ISP. With help of Extended access list how to control only FTP service , remining it shoud work, Advace thanks RedsLeela Krishna

Has anyone succesfully attached a laptop type secuirty cable to the Security Lock Feature on the front of the Aironet 1200 itself? I have the Kensington ComboSaver series 64050 that are supposed to work however I am unable to turn the lock once inser...

Hello, I would like to know if the Cisco's roaming technology between two Aironet Access Points is interoperable with other vendors (eg: Symbol, AVAYA, etc.). Thank you Paolo

Do you have to have an access point to have a wireless LAN? If I have 3 machines with wireless NIC's, do they need an access point if they are all very close together?

Does anyone know what the WLAN SE and FE recertification requirements are?

Hello!I'm trying to connect a computer with MS-DOS 6.22 to a LAN. When I boot the computer appears this message:Wireless NDIS 2.0 driver for DOS version 2.04...Card Services not present, trying 82365.CSCNDIS2.DOS was not loaded.Error 7321 : Network c...

I am trying to find a way to store the WEP key in DOS on a machine. I have the CSCODI drivers loading just fine. However to get into our network login screen in dos here. we have to have the wep key stored. I am using the Aeornet 350 PCI card, and wh...