Hi,Can anyone help me providing information that I wanna connect two cities distant 450 miles using radio link. Is that possible and if so what would be the product and other stuff that I have to follow.TksKallol
Hi,Can anyone help me providing information that I wanna connect two cities distant 450 miles using radio link. Is that possible and if so what would be the product and other stuff that I have to follow.TksKallol
Hi,I'm having problems connecting the new Compaq HNW-200 USB adaptor with a Cisco 340 Base Station.That is, it works very well when I'm not using WEP, but as soon as I configure the base station to use Wep, and puts a ASCII code, they can't communica...
Hiya, I have a Compaq Ipaq PocketPC 2002, the 3800 series. I have installed the Windows CE 3 drivers and everything is fine until I insert the PC card into my PC Sleeve expansion slot. Its not recognised at all, have to name it, ie PocketPC 2002 does...
In conjunctions with ASC does the NAS server have to be a Cisco product or hardware or can it be exempt from the scheme of a wireless LAN. If so can the NAS just be a radius server. Are applications or devicws needed?
I do RF Surveys for the Oil Industry and have a facility that is very dense. To cover the required areas, it will call for 5 APs. Do to the locations, design and surroundings, there is no getting around the outcome. Cisco advises to use Channels 1, 6...
We have a wireless lab in a large high school and we can only get 4 laptops to connect a time. Is there come configuration problem that we can't find? Also, how do you connect locally to the Aironet 350 to administer it?
It seems there is no point to use diversity with two omnidirectional antenna's on an access point since the AP will only use the antenna with the best reception, is that a safe bet? Will the 350AP work fine if I configure it to use only one antenna f...
eg I have 2 APs on channel 6 with SSID = ciscowhat will happen when 2 APs CROSS each other?what happen to client in CROSS region?what happen when client roam across?
Hi I'm a student who is trying figure out how to configure Woreless Network to an internetwork. What would be the proper steps to implement such a network in a two floor facility that is 344sq.ft? We have downloaded the ACS from the web and we are us...
hi groupthis is my first post here.i have a small office less than 20Metters with 10 laptop computers, i would like to share the internet with the laptops and to setup wireless LAN, there are too much choices from Cisco i do not which one will woke t...
I am tring to get my 340 card to talk to my Linksys WAP11 at home. It works fine with WEP turned off, but when I configure 40 or 128 bit WEP the system fails to pull a IP address. Has anybody configured this card to work with the WAP11 using WEP? If ...
Hello,Can anyone give me information regarding data transfer using mobile phone.TksKallol
Hi, I would like to load balance a group of 50 wireless users with two AP in an office area. What are the conventional and effective ways that I can do to achieve that? Tks.
I have two 340 Series Cisco/Aironet PC cards. When I run the Client Encryption Module on one of the cards it states that "WEP support has not been purchased". I didn't know you could get it without that option. I have upgraded both cards to Firmware ...
I am sorry if this has been asked before or it is the wrong place to ask this.I just want to know how secure is MAC-Based Authentication on an AP340 access-point (not bridge) with version 11.07.I've done this by adding 'Dest MAC Address' in 'Address ...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 11-17-2026 11:43 AM | ||
| 10-15-2026 05:58 PM | ||
| 10-12-2026 06:46 PM | ||
| 09-30-2026 07:34 AM | ||
| 08-10-2026 11:32 AM |
| User | Count |
|---|---|
| 4 | |
| 2 | |
| 1 | |
| 1 | |
| 1 |