05-08-2023 07:06 PM
Hi All,
Environment: WLC 5520 version 8.5.161.0.
I have problem about Client connected SSID and It's can't obtain DHCP then this Wi-Fi status "no internet"
Example:
2 SSID: A and B [WLAN config same interface VLAN Identifier 152]
1 SSID: C [WLAN config interface VLAN identifier 154]
When Issue occurred, Client connect SSID:C, It's can connected and connect internet normally.
But Client connect SSID A and B. It's can't obtain IP Address.
All SSID obtain IP Address from same DHCP Server.
So I must be restart both WLC then Client connect SSID: A and B normally.
Could you suggest or Have you any face like this problem ?
Thanks you all.
05-09-2023 12:04 AM - edited 05-09-2023 12:05 AM
1) Check DHCP server's logs
2) Upgrade controller to advisory release : https://software.cisco.com/download/home/286284738/type/280926587/release/8.10.185.0
3) Have a checkup of the controller configuration with this procedure : https://community.cisco.com/t5/networking-knowledge-base/show-the-complete-configuration-without-breaks-pauses-on-cisco/ta-p/3115114/page/2#toc-hId-1039672820 , have the output analyzed with : https://cway.cisco.com/wireless-config-analyzer/
4) Use client debugging according to https://www.cisco.com/c/en/us/support/docs/wireless/aironet-1200-series/100260-wlc-debug-client.html (corrected) , you can have client debugs analyzed with https://cway.cisco.com/wireless-debug-analyzer/
M.
05-14-2023 09:09 PM
Thanks for your reply, My case affected by Firewall prevent DHCP Service, It's related about CVE-2004-0899.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide