cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1548
Views
0
Helpful
4
Replies

ASR 9906 Errors with A9K-2x100GE-TR

philclemens1835
Level 1
Level 1

I installed an A9K-2x100GE-TR in one of our new 9906's and repeatedly get these messages in the log:

LC/0/2/CPU0:Feb 7 00:12:31.851 UTC: sysmgr[91]: l2fib_mgr(1) (jid 257) (pid 876672) (fail_count 2) abnormally terminated, restart scheduled
LC/0/2/CPU0:Feb 7 00:12:31.851 UTC: sysmgr[91]: %OS-SYSMGR-3-ERROR : l2fib_mgr(1) (jid 257) exited, will be respawned with a delay (slow-restart)
LC/0/2/CPU0:Feb 7 00:12:31.852 UTC: sysmgr[91]: %OS-SYSMGR-3-ERROR : l2fib_mgr(257) (fail count 1) will be respawned in 10 seconds
LC/0/2/CPU0:Feb 7 00:14:11.860 UTC: sysmgr[91]: %OS-SYSMGR-7-DEBUG : l2fib_mgr(1) (jid 257) did not signal end of initialization
LC/0/2/CPU0:Feb 7 00:17:42.459 UTC: l2fib[257]: %PLATFORM-PLAT_L2FIB_VPLS-3-INIT_ERROR : Failed to register with multicast fabric: Resource temporarily unavailable (0000000b)

 

There is 0 config on this box, other than line con stop bits to 1.  The only license is for the 24 port 1GE10GE cards, but this doesn't look like a license issue.

 

Other info:

RP/0/RSP0/CPU0:ios#show install active summary
Fri Feb 7 20:30:05.736 UTC
Default Profile:
SDRs:
Owner
Active Packages:
disk0:asr9k-mini-px-6.4.2
disk0:asr9k-9000v-nV-px-6.4.2
disk0:asr9k-doc-px-6.4.2
disk0:asr9k-fpd-px-6.4.2
disk0:asr9k-mcast-px-6.4.2
disk0:asr9k-mgbl-px-6.4.2
disk0:asr9k-mpls-px-6.4.2
disk0:asr9k-optic-px-6.4.2
disk0:asr9k-services-px-6.4.2
disk0:asr9k-video-px-6.4.2
disk0:asr9k-k9sec-px-6.4.2
disk0:asr9k-px-6.4.2.sp3-1.0.0


RP/0/RSP0/CPU0:ios#show platform
Fri Feb 7 20:33:53.455 UTC
Node Type State Config State
-----------------------------------------------------------------------------
0/RSP0/CPU0 A9K-RSP880-LT-TR(Active) IOS XR RUN PWR,NSHUT,MON
0/RSP1/CPU0 A9K-RSP880-LT-TR(Standby) IOS XR RUN PWR,NSHUT,MON
0/0/CPU0 A9K-24X10GE-1G-SE IOS XR RUN PWR,NSHUT,MON
0/1/CPU0 A9K-24X10GE-1G-SE IOS XR RUN PWR,NSHUT,MON
0/2/CPU0 A9K-2x100GE-TR IOS XR RUN PWR,NSHUT,MON

 

Figured I'd come here first prior to opening a case.

 

 

1 Accepted Solution

Accepted Solutions

ahh, thanks.

i see the note here

 

https://www.cisco.com/c/en/us/td/docs/iosxr/asr9000/hardware-install/overview-reference/b-asr9k-overview-reference-guide/b-asr9k-overview-reference-guide_chapter_01.html#id_53128

 

under asr9906

The Cisco ASR 9906 supports A9K-VSM-500 and Tomahawk-based line cards; it does not support SIP-700, A9K-ISM-100, Trident-based, or Typhoon-based line cards. Refer to ASR 9000 Series Line Card Types for information on line card types.

View solution in original post

4 Replies 4

tkarnani
Cisco Employee
Cisco Employee

Hi,

 

i have seen that error usually when the np fails to initialize or some other hardware issue.

do you see any pfm alarms?

 

show pfm location 0/2/cpu0

show log | inc pfm

 

you may need to physically re-seat the card to try and recover this.

 

Thanks

philclemens1835
Level 1
Level 1

TAC confirmed that neither the Trident nor Typhoon LC's are compatible with the 9906.

 

ahh, thanks.

i see the note here

 

https://www.cisco.com/c/en/us/td/docs/iosxr/asr9000/hardware-install/overview-reference/b-asr9k-overview-reference-guide/b-asr9k-overview-reference-guide_chapter_01.html#id_53128

 

under asr9906

The Cisco ASR 9906 supports A9K-VSM-500 and Tomahawk-based line cards; it does not support SIP-700, A9K-ISM-100, Trident-based, or Typhoon-based line cards. Refer to ASR 9000 Series Line Card Types for information on line card types.

Exactly.  Credit to adiazmar for finding that.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: