ASR-9912 Cisco IOS XR image 6.4.2 memory MIB

[J19]

Hi all,

i want to add the available memory of my ASR 9912 to the PRTG and i am facing a problem where the PRTG is reading or showing wrong integer. (that was by add cisco system health check sensor).

Any idea how can i add a sensor (can be custom) to the prtg to monitor the available memory. Also please advise on how can i compile or import the MIB files downloaded from cisco?

Thank you,

[tkarnani · Accepted solution]

Hi,

i am unsure how to add in prtg, are you able to poll or add a custom poll with these OIDs?

OID for used memory: 1.3.6.1.4.1.9.9.221.1.1.1.1.18

OID for free memory: 1.3.6.1.4.1.9.9.221.1.1.1.1.20
OID for CPU: 1.3.6.1.4.1.9.9.109.1.1.1.1.7

example below

https://community.cisco.com/t5/service-providers-documents/monitoring-cpu-utilization-on-ios-xr-based-platforms-using-snmp/ta-p/3115231

Thank you

[J19]

Hi,

it has worked, Thank you.