ASR9006/A9K-MPA-4X10GE

[leonardo_liberati]

Hi,

we are new on ASR and IOS XR. We have an ASR 9006 with the line card in the discussion subject (A9K-MPA-4X10GE). The four leds on the card are red. Is there any command to activate? Is a Layer 1 problem?

Our release is Cisco IOS XR Software, Version 4.3.0[Default].

Thank You!!!

[asad747]

Red LEDs mean that Port is physically down at layer-1. Are these ports connected at other end with 10G device??

Can you please share the output of following;

show int desc | i Te

show int te x/x/x/x

[leonardo_liberati]

Solved!!! I call the other site and it has a 1 GE SFP!!! Damn!!! Thanks!!!