04-12-2013 02:33 AM
Hi
I found error during upgrade ios
Please suggest me to solve the problem
#### Before Upgrade IOS is running on 3.6.2 and I try to Activacte packet follows.######
Node 0/RP0/CPU0 [RP] [SDR: Owner]
Boot Device: disk0:
Boot Image: /disk0/hfr-os-mbi-3.6.2/mbihfr-rp.vm
Active Packages:
disk0:hfr-sbc-3.6.2
disk0:hfr-fpd-3.6.2
disk0:hfr-doc-3.6.2
disk0:hfr-diags-3.6.2
disk0:hfr-mgbl-3.6.2
disk0:hfr-mcast-3.6.2
disk0:hfr-mpls-3.6.2
disk0:hfr-k9sec-3.6.2
disk0:comp-hfr-mini-3.6.2
####The problem occurs when the Install activate packet a new IOS version (I tried both 3.9.1,4.0.0,4.0.1) Activate will not be the same, because the message that #####
RP/0/RP0/CPU0:pyt-cr-01(admin)#install add ftp://10.10.10.2/3.9.2/comp-hfr-min$
RP/0/RP0/CPU0:Apr 11 13:02:24.034 : adminexec[65739]: %MGBL-adminexec-3-ACCT_ERR : command accounting failed - 'AAA API' detected the 'fatal' condition 'Failover error'
RP/0/RP0/CPU0:Apr 11 13:02:24.345 : instdir[210]: %INSTALL-INSTMGR-6-INSTALL_OPERATION_STARTED : Install operation 18 '(admin) install add /ftp://10.10.10.2/3.9.2/comp-hfr-mini.pie-3.9.2 activate syncInstall operation 18 '(admin) install add
hronous' started by user 'arthit' /ftp://10.10.10.2/3.9.2/comp-hfr-mini.pie-3.9.2 activate synchronous' started
by user 'arthit' via CLI at 13:02:24 Bangkok Thu Apr 11 2013.
Part 1 of 2 (add software): Started
- 37% complete: The operation can still be aborted (ctrl-c for options)RP/0/RP0/CPU0:Apr 11 13:23:54.044 : wdsysmon[404]: %HA-HA_WD-4-DISK_WARN : A monitored device /disk0: is above 80% utilization. Current utilization = 81. Please remove unwanted user files and configuration rollback points.
RP/0/RP0/CPU0:Apr 11 13:23:54.048 : wdsysmon[404]: %HA-HA_WD-4-DISK_WARN : A monitored device /disk0:/config/lr is above 80% utilization. Current utilization = 81. Please remove unwanted user files and configuration rollback points.
Info: The following package is now available to be activated:
Info:
Info: disk0:comp-hfr-mini-3.9.2
Info:
Info: The package can be activated across the entire router.
Info:
Part 1 of 2 (add software): Completed successfully
Part 2 of 2 (activate software): Started
- 50% complete: The operation can still be aborted (ctrl-c for options)RP/0/RP0/CPU0:Apr 11 13:29:06.668 : ipv4_rib[236]: %ROUTING-RIB-3-UPDATE_TIMEOUT : Client "bgp" updated the RIB without signaling update completion for Vrf: "default" Tbl: "default" Safi: "Unicast"
RP/0/RP0/CPU0:Apr 11 13:29:06.682 : ipv6_rib[254]: %ROUTING-RIB-3-UPDATE_TIMEOUT : Client "bgp" updated the RIB without signaling update completion for Vrf: "default" Tbl: "default" Safi: "Unicast"
\ 50% complete: The operation can still be aborted (ctrl-c for options)RP/0/RP0/CPU0:Apr 11 13:31:23.603 : instdir[210]: %INSTALL-INSTMGR-3-INSTALL_OPERATION_USER_ERROR : User error occurred during install operation 18. See 'show install log 18 detail' for more information.
Error: Cannot proceed with the activation because of the following package
Error: incompatibilities:
Error: hfr-k9sec-3.6.2 needs hfr-rout-3.6.2, or equivalent, to be active
Error: on the same nodes.
Error: hfr-k9sec-3.6.2 needs hfr-fwdg-3.6.2, or equivalent, to be active
Error: on the same nodes.
Error: hfr-k9sec-3.6.2 needs hfr-base-3.6.2, or equivalent, to be active
Error: on the same nodes.
Error: hfr-k9sec-3.6.2 needs hfr-os-mbi-3.6.2, or equivalent, to be active
Error: on the same nodes.
Error: hfr-mpls-3.6.2 needs hfr-rout-3.6.2, or equivalent, to be active on
Error: the same nodes.
Error: hfr-mpls-3.6.2 needs hfr-fwdg-3.6.2, or equivalent, to be active on
Error: the same nodes.
Error: hfr-mpls-3.6.2 needs hfr-base-3.6.2, or equivalent, to be active on
Error: the same nodes.
Error: hfr-mpls-3.6.2 needs hfr-os-mbi-3.6.2, or equivalent, to be active
Error: on the same nodes.
Error: hfr-mcast-3.6.2 needs hfr-rout-3.6.2, or equivalent, to be active
Error: on the same nodes.
Error: hfr-mcast-3.6.2 needs hfr-fwdg-3.6.2, or equivalent, to be active
Error: on the same nodes.
Error: hfr-mcast-3.6.2 needs hfr-base-3.6.2, or equivalent, to be active
Error: on the same nodes.
Error: hfr-mcast-3.6.2 needs hfr-os-mbi-3.6.2, or equivalent, to be active
Error: on the same nodes.
Error: hfr-mgbl-3.6.2 needs hfr-rout-3.6.2, or equivalent, to be active on
Error: the same nodes.
Error: hfr-mgbl-3.6.2 needs hfr-fwdg-3.6.2, or equivalent, to be active on
Error: the same nodes.
Error: hfr-mgbl-3.6.2 needs hfr-base-3.6.2, or equivalent, to be active on
Error: the same nodes.
Error: hfr-mgbl-3.6.2 needs hfr-os-mbi-3.6.2, or equivalent, to be active
Error: on the same nodes.
Error: hfr-diags-3.6.2 needs hfr-admin-3.6.2, or equivalent, to be active
Error: on the same nodes.
Error: hfr-diags-3.6.2 needs hfr-base-3.6.2, or equivalent, to be active
Error: on the same nodes.
Error: hfr-diags-3.6.2 needs hfr-os-mbi-3.6.2, or equivalent, to be active
Error: on the same nodes.
Error: hfr-doc-3.6.2 needs hfr-os-mbi-3.6.2, or equivalent, to be active
Error: on the same nodes.
Error: hfr-fpd-3.6.2 needs hfr-os-mbi-3.6.2, or equivalent, to be active
Error: on the same nodes.
Error: hfr-sbc-3.6.2 needs hfr-rout-3.6.2, or equivalent, to be active on
Error: the same nodes.
Error: hfr-sbc-3.6.2 needs hfr-fwdg-3.6.2, or equivalent, to be active on
Error: the same nodes.
Error: hfr-sbc-3.6.2 needs hfr-base-3.6.2, or equivalent, to be active on
Error: the same nodes.
Error: hfr-sbc-3.6.2 needs hfr-os-mbi-3.6.2, or equivalent, to be active
Error: on the same nodes.
Error: Suggested steps to resolve this:
Error: - check the installation instructions.
Error: - activate or deactivate the specified packages on the specified
Error: nodes.
Part 2 of 2 (activate software): Failed. Error information available as part of
command output above. For more information see 'show install log 18'
Part 1 of 2 (add software): Completed successfully
Part 2 of 2 (activate software): Failed. Error information available as part of
command output above. For more information see 'show install log 18'
/ 50% complete: The operation can still be aborted (ctrl-c for options)RP/0/RP0/CPU0:Apr 11 13:31:25.904 : instdir[210]: %INSTALL-INSTMGR-6-INSTALL_OPERATION_FAILED : Install operation 18 failed
Install operation 18 failed at 13:31:25 Bangkok Thu Apr 11 2013.
########We try to Deactivate unnecessary
Packet on Vesion (3.6.2) ########
RP/0/RP0/CPU0:pyt-cr-01(admin)#show ins ac
RP/0/RP0/CPU0:Apr 11 18:28:43.389 : adminexec[65768]: %MGBL-adminexec-3-ACCT_ERR : command accounting failed - 'AAA API' detected the 'fatal' condition 'Failover error'
Secure Domain Router: Owner
Node 0/RP0/CPU0 [RP] [SDR: Owner]
Boot Device: disk0:
Boot Image: /disk0/hfr-os-mbi-3.6.2/mbihfr-rp.vm
Active Packages:
disk0:comp-hfr-mini-3.6.2
Node 0/RP1/CPU0 [RP] [SDR: Owner]
Boot Device: disk0:
Boot Image: /disk0/hfr-os-mbi-3.6.2/mbihfr-rp.vm
Active Packages:
disk0:comp-hfr-mini-3.6.2
Admin Resources:
Node 0/SM0/SP [SP] [Admin Resource]
Boot Device: bootflash:
Boot Image: /disk0/hfr-os-mbi-3.6.2/sp/mbihfr-sp.vm
Active Packages:
disk0:comp-hfr-mini-3.6.2
Node 0/SM1/SP [SP] [Admin Resource]
#### Then Install ####
RP/0/RP0/CPU0:pyt-cr-01(admin)#ins ac disk0:hfr-mini-p-4.0.1
RP/0/RP0/CPU0:Apr 11 18:30:20.815 : adminexec[65768]: %MGBL-adminexec-3-ACCT_ERR : command accounting failed - 'AAA API' detected the 'fatal' condition 'Failover error'
RP/0/RP0/CPU0:Apr 11 18:30:21.228 : instdir[210]: %INSTALL-INSTMGR-6-INSTALL_OPERATION_STARTED : Install operation 115 '(admin) install activate disk0:hfr-mini-p-4.0.1' started by user 'arthit'
Install operation 115 '(admin) install activate disk0:hfr-mini-p-4.0.1' started
by user 'arthit' via CLI at 18:30:21 Bangkok Thu Apr 11 2013.
- 1% complete: The operation can still be aborted (ctrl-c for options)RP/0/RP0/CPU0:Apr 11 18:32:37.486 : instdir[210]: %INSTALL-INSTMGR-3-INSTALL_OPERATION_tion. RROR : User error occurred during install operation 115. See 'show install log 115 detail' for more informa
Error: Cannot proceed with the activation because of the following package
Error: incompatibilities:
Error: hfr-admin-3.6.2 needs hfr-base-3.6.2, or equivalent, to be active
Error: on the same nodes.
Error: hfr-admin-3.6.2 needs hfr-os-mbi-3.6.2, or equivalent, to be active
Error: on the same nodes.
Error: hfr-fwdg-3.6.2 needs hfr-base-3.6.2, or equivalent, to be active on
Error: the same nodes.
Error: hfr-fwdg-3.6.2 needs hfr-os-mbi-3.6.2, or equivalent, to be active
Error: on the same nodes.
Error: hfr-lc-3.6.2 needs hfr-base-3.6.2, or equivalent, to be active on
Error: the same nodes.
Error: hfr-lc-3.6.2 needs hfr-os-mbi-3.6.2, or equivalent, to be active on
Error: the same nodes.
Error: Suggested steps to resolve this:
Error: - check the installation instructions.
Error: - activate or deactivate the specified packages on the specified
Error: nodes.
| 1% complete: The operation can still be aborted (ctrl-c for options)RP/0/RP0/CPU0:Apr 11 18:32:39.741 : instdir[210]: %INSTALL-INSTMGR-6-INSTALL_OPERATION_FAILED : Install operation 115 failed
Install operation 115 failed at 18:32:39 Bangkok Thu Apr 11 2013.
Please suggest me to solve the problem
Thank you
04-12-2013 08:56 AM
Hi,
show install log 18 detail
and
show install log 19 detail
may help understanding what's going on.
Do you have enough space on disk0: ?
Thanks,
N.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide