Application Networking

Running WAAS 4.4.1, what is the procedure to monitor Oracle traffic? I see a classifier called Oracle, but I don't see that in any of the monitoring screens. I do know that oracle, TCP1521, is being optimized as shown here:ConnID        Source IP:Por...

Hello team,Hope that you're doing great. I want to ask you if you can help me on some NX-OS for Nexus 7000 that you recommend. My customer has 6 Nexus 7000 running differnet NX-OS: 4.1(5), 4.2(3) and 4.2(2a). My customer wants to have more recent ver...

Hello,I have configured the cisco ace 4710 in mode bridge, but i want know if i can connect servers of the vlan 401 in the Switch, for example 10.1.40.50 with default-gateway SVI 401 10.1.40.10 with real servers of the ACE (10.1.40.2 and 10.1.40.3 wi...

Hi everyone,We're facing a problem with connections being dropped due to inactivity timeout and we can't find the root case of this behaviour.We created a parameter-map and set connection timeout inactivity to 86400 (24 hours) as described in this do...

Hi,I've following command applied in policy map: loadbalance vip icmp-reply activebut the VIP still answers to ping even though the assciate serverfarm is down.please help!

Hi All,On the ACE, is there a way for a server to hit itself or other server within the same vlan on their public addresses?Any help on this issue would be much appreciated.Regards,Nilesh

We have IDM application with SSL offloading in ACE with action REWRITE statement. We are using IDM for both HTTP and HTTPS applications authentication. But we have problem for HTTP sites like after IDM authentication HTTP header will be rewrite as HT...

Hi,When associating multple probes with a serverfarm, is it possible to build a simple boolean expression of, say, two probes?For example, if I am polling both tcp/80 and tcp/443 ports, can I take an rserver out of service like following80 down, 443 ...

Does anyone have [or know where to get] a detailed explanation for 'Least Connections' Predictor when applied on the ACE module.This question has arisen after seeing one server [out of four in farm] receiving more connections then others. If the algo...

Hi, I have CSS1501 running in one-armed mode, for VIP setup below for port 443 (SSL Certificates are running on back-end servers):  content APP_https    vip address x.x.x.x     port 443    protocol tcp    advanced-balance sticky-srcip    sticky-inact...

May be that I understood the least connections concept wrong.When I use basic load balancing like least connections in combination with an adv bal sticky method, does it mean a brand new session with out any sticky component, will just be applied bli...

Hi,We are using wae-612 in our network are planning to upgrade to a waas box and are looking at wae-674-K9. I don't seem to find the maximum number of sessions a wae-674-k9 can support. Is there any published document about the number of sessions wae...