Application Networking

Good day,We currtenly have two dc's (site A and site B)We are using netapps as our SAN and we ar booting our server directly from the SANSAN A and SAN B are insync and the network between site A and site B is routed.The challange:When a server is fai...

Logged into and got below, Can I do a hot reseat of the drive or do I have to shut down (docs say too) before reseating? Any other thoughts would be appreciated. No directory /local/local1! Logging in with home = "/". System Initialization Finished. ...

Trying to setup snmp for my wae devices in Cacti, all my network devices go in fine, but the wae devices come up as unknown.  If I go to a command line and try to add a basic public RO community, it only has an option for RW, if I just set it to publ...

Hello All,I have configured four context in ACE module.I am trying to authenticate individual context through ACS.Admin context authentication is working perfectly fine , and it is assigning the role of Admin for all the ACS users.But when i am tryin...

Hello Support,I need assistance in creating the keepalives for connecting to exchange servers.I have 3 CAS servers and need to ensure the following TCP ports are monitored, 443, 135, 143, 993, 110, 995.I can easily create a port to monitor, but i nee...

Hi,We are starting to get applications that will respond to hundred's of ports. This would require 1 probe per port. As you might of guessed, this would be time consuming to configure. Is there a way to configure group's of ports or the only way is t...

If I https to the management gui interface on one of our 274 devices and go to monitoring and select the CIFS tab, the total time saved is reading Zero.  This does not seem right because some of the other devices have a large number there??

Does anybody know if it is possible to load balance the T3 Oracle´s proprietary tunneling protocol supported by Oracle Weblogic with Cisco ACE?TIA,Claudio Uemura

Hi all,We currently use a Cisco SCA for SSL off load. When adding client certificates to the SCA, there is an option to "Add Client Certificate Info" - which uses a check box to enable this feature. This feature, to the best of my knowledge, sends th...

Hi,I am planning to deploy a WAAS Central Manager (CM) at my Data Center. Currently, we have 5 sites (1 DC + 4 Branches) in INDIA, where we deployed WAE-7341 and WAE-674 for WAN acceleration. Currently, all these Accelerator boxes are managed by CM l...

Hi,We are missing historical data in the CM reporting for most of the devices in our network for two particular days (26 and 28 Feb).  The days either side of these are fine.If I log into the CM and look at the two area charts (original and optimised...

We are currently running remote TCP security scans on our networks and are running into a major problem where when the scans are taking place the ACE connection resource usage sky rockets and easily reaches the maximum 4 million connections.  This me...