Application Networking

Hi,The Sticky function of the ACE is not working. There were no changes been made on the device it was working fine before but not now,.We have 2 ACE one is Active(ACE1) and Second one is Standby (ACE2).Testing done till now:-================Done the...

Here customer requirement is to take backup of opened Database file .fdb(Microsoft Dynamic Navision) integrated with WAN optimization (Cisco WAASmobile).Problem is  Cisco WAAS mobile is not optimizing  Symantec backup process when backup job is runni...

Hi allI hope someone can help me out with this problem. We are running A3(2.2), and two of our rservers (the only two for a particular farm, and the only two running the same OS/webserver combination (Ubuntu 10.04/gninx) are reporting a very high num...

I have a very strange issue going on. I have a CSS setup with a two-armed config. The services live on the private interface of the CSS and the VIPs live on the public interface of the CSS. I am balancing the VIP 10.100.31.242 amongst three services ...

Hi;I have a probem with the cisco-wave274.the appliance is inaccessible by console and nothing is displayed on the screen.

Hi !My host header class mapclass-map type http loadbalance match-all REDIRECT  2 match http header Host header-value "www.xxx.org"does not match even i find the host header www.xxx.org in http fox host header field ?Any suggestions ?kr

Hi,We are using a CSS11503 to loadbalance SIP traffic. There are no SIP proxies involved and we only want to loadbalance the SIP invites. The CSS is connected in a one-armed set-up. We do not want to NAT the source address so we have no group configu...

hiI wanted to know something about the ace appliance, do I loose any features if I choose to use the ACE in bridge mode (like nat,tcp reuse , ssl authenticator and termination and such...) ?thanks

Hi  ,Managed to set up the connection between the ACE and an SNMP monitoring system. Tested it and found that it was working fine for SNMP performance parameters and traps like linkup/linkdown.Problem now is that we would like to monitor the failover...