Application Networking

Greetings,I have a situation where we need a destination nat to happen on ACE for an outbound flow that is redirected into SSLM modules, then coming back to the ACE and forwarded outward. There is a requirement to keep the SSLM module redirection so...

can cisco waas do proxy file sharing

Hosting Solution Software 1.9 does not support Catalyst 6500 devices that simultaneously run Cisco IOSSLB and contain Content Switching Modules. To effectively manage the device, move the IOS SLBconfiguration files to the Content Switching Module car...

I have been asked about providing this as a way to secure RDP connections - has anyone done this? I can see two potential ways, but do not know much about RDP.How is the SSL part of RDP initialised? would it be prractical to terminate the SSL on the ...

Has anyone experienced issues with Opentext DM (document management) or downloading files across the WAN and those files will not complete if they are large in size.

Hi,Are there any generel recommendations on how many class-maps a multi-match policy should contain? In this particular case, my multi-match policy will contain some 60+ class'es, as each customer has somewhere between 3 and 5 public ip's and traffic...

I have a NME-WAE-502 in a 2800 router. The NME is running WAAS software 4.0.13 (build b23 Sep 25 2007). All the other WAE appliances and CM are running 4.1.1c build 16.Is it a problem when CM is 4.1.1.c while NME is 4.0.13?I like to upgrade the NME t...

hi,i've 4 virtual context in my ACE configuration.it's possible to use the same real server in multiple context?2 context are configurated in one-arm mode and 2 in bridge mode.tks all Aghibear

I am new to the CSM and SLB. I have any existing SLB configuration with 2 distinct servers farms. The farms are on their own VLANs.We want to move physical servers from 1 VLAN to the same VLAN as the other server farm.So I want 2 server farms on the ...

Hi all, I configured ACE like below configuration .so users connecting to server as http://10.244.0.50:7778 its oracle forms server.While users connecting through SLb they are getting disconnection in 1 min.How to create http cookie for this url.I t...

When connecting WAAS directly to router interface, is a straight through cable used?

We are still having problems with clients losing IP addresses. The clients will time out and go to the generic 169.x.x.x instead of our 10.x.x.x network. The clients authenticate to an RSA server. The problem happens on random clients so it's been...

Hi Everyone,Does anyone know if you can send SNMP traps for all of the alarms that get generated on the CM? I'm looking to send alarm messages from the WAE/WAVE device such as failed hard drives, TFO overload,ect... The only way I can see this is by ...