Archived Small Business Support

Just for your info guys...I created 3 VLANs on top of the default VLAN1.My LAN IP address was set on the LAN configurations as 172.16.10.1/24The VLANs that i created after however automatically picked up IP Addresses like so:192.168.2.1/24  VLAN2192....

Don,in all the years I've owned (and recently tested) linksys/cisco products, not once have I ever seen any "failback" capability designed with the unit.  Is there a chance before these units go into mass production that failover could be considered?...

BTW does the RV220W support jumbo frames?  I also have Cisco SLM2008.come to think of it does any of the LAN ports support PoE?

Well finally got the RV220W here now.  thanks for all you effort Don!I am in thr process of moving house so until next week i wont have all my lan up and running the way i want to test out some media streaming and SSL tunneling.a few minor observatio...

Might have found a bug with the restore functionality of CCA. Which log do I send in?

Don,unless you have another username/password combination we don't know about, I have a bug to identify right from jump.  I still can't log into the router after about 2hrs of trying things (i.e., factory default, guessing at possible username and pa...

Vlan appears to be working with one "minor" problem.  For example, if I connect my pc directly to the RV220w, I can ping all of the vlans (provided the ip address on the pc coincides with the vlan assigned to the port):Default Vlan:  172.16.30.0 (Pri...

I forgot the credentials for the WAP4410N, but noticed that the credentials are still in TBA to connect to the device. Yet a web connection only takes me to the login prompt and wants the username and password, and the TBA does say it can login succe...

Hi All,I'm a little late to the party  ... The UC320 I have here is running 1.01.01(000). I noticed on one of the other threads that 1.01.06 is now around.  Is there any reason I shouldn't upgrade straight to this one?Mark

Hello,I just completed an install and I'm having a few issues with inbound calls. They wanted to have a main line that rings all of the phones. To accomplish this I created a 2 line shared extension (200). This allows 4 phone calls to come in. For ca...

Very nice...  It's got a new look that I'm digging, plust it's got the "weight" of a business class router, which illustrates some work has been put into it.  I'm just getting in from work, but I've got the steam left to play around with this for a m...

Hello,We have been using the Spam and Virus Blocker without any problems for some months now.  About two days ago, an incident resulted in the device's power being pulled without the device having shut down and since that time, I have been receiving ...

Okay, here's a few of my observations I've baselined before upgrading the firmware:1) Admin Password:  Unless I looked over something again, there is no place to change the default admin password.  2) Port Forwarding:  It appears only "port triggeri...

I find it very annoying that on many Cisco devices the lights on the front indicating which ports are active are exactly opposite of the actual connections in the back.  For example, on this SG200, if I connect to port 1 which is on the far right if ...