Hi,
So I see that the WLC hardware itself is not affected, but the AP's are (I have tons of affected lightweights in my network)
I see that the 8.3.130 software is available for the 5508 controller, looks like it was released end September. The s...
Hi
After upgrading from 8.2.141.0 to 8.3.130.0 we are facing issue with mobile connection to AP.
On new version some mobile is connected and some not able to connect.
now we have reverted back to old version and it is working fine
Any idea or new ve...
Our 8540 WLC is running SW 8.8.121.0 and our 3700 series APs are running SW 8.3.121.0 too. Having read through numerous pages of stuff, am I correct in saying we have to upgrade these APs to SW 8.3.130.0?
I have some AIR-CAP3702I-A-K9 APs controlled by a 2500 series WLC running 7.6.120.0.
Am I affected by this vulnerability. If yes , what is the fix release?
It is stated that 8.0(150.3) is fixed but the latest version on https://software.cisco.com/download/release.html?mdfid=283791169&flowid=&softwareid=280926605&release=8.0.140.0&relind=AVAILABLE&rellifecycle=ED&reltype=latest ist 8.0.150.0?
currently , we have UCS central appliance (Version 1.5B). does any one has any idea if 1.5b is affected with below given :-Vulnerability
Cisco UCS Central Software Command Line Interface Restricted Shell Break Vulnerability
CSCve70762
Hi,
I am using CUCM 10.5. How I can increase the time between the repeated MOH audio.After completing the MOH its immediately repeating the same MOH. I need at least 3 seconds between the audio repetition
. Please help me.
Thank you
We ran into this issue too when we upgraded to 6.0. You just have to add source networks to each rule that matches the IP networks used within that realm. If each source network is unique, the rules will no longer overlap.
